CFR100JR-52-68K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole resistors are used in a variety of applications in electronics and electrical engineering. The most common type of through-hole resistor is the CFR100JR-52-68K, which is used in motor control applications and for high-current switching. It is designed to handle high voltages, high currents, and high temperatures, giving it the reliability and accuracy that makes it such a trusted component.

The CFR100JR-52-68K is a thick-film resistor that is made up of a resistive element, a heat sink layer, and an outer shell. The dielectric layer is the key component of the component, and it works by introducing resistance to the electrical signal that passes through it. It is formed with a special ceramic material that is highly resistant to changes in temperature, humidity, and pressure, making it an excellent choice for high-voltage applications.

The ceramic resistive element in the CFR100JR-52-68K is a highly conductive metal oxide, such as titanium dioxide, and acts as the actual resistor. It has a very high resistive value of about 52 to 68 kilohms, which makes it ideal for high-current switching and motor control applications. The metal oxide is carefully coated in a special protective insulation material to ensure that it maintains its resistive properties despite the conditions.

The heat sink layer of the CFR100JR-52-68K is an essential part of the component, as it helps to dissipate the heat generated by the high power signals passing through it. It is made up of a thin sheet of plastic or ceramic material that allows the heat to be quickly and efficiently removed from the environment. The heat is then conducted to the outer shell, where it is further dissipated to the atmosphere.

The outer casing of the CFR100JR-52-68K is usually made from aluminum, but other materials can be used. This casing helps to protect the circuit from external factors such as moisture and dust. It also helps to dissipate the heat from the circuit, which is why it is so important in high-voltage applications.

The working principle of the CFR100JR-52-68K is fairly simple. When a current passes through the resistor, the electrical signal is transformed into a thermal energy (heat). This heat is then conducted by the heat sink layer and dissipated into the atmosphere. The amount of current that passes through the resistor is dependent on the resistance of the metal oxide, as well as the voltage that is being applied. By adjusting the voltage and current, different levels of resistance can be achieved, thus giving the desired effect.

The CFR100JR-52-68K is a reliable and accurate through-hole resistor, making it an ideal choice for motor control and high-current switching applications. It is designed to withstand the test of time and severe environmental conditions, giving it an edge over other types of resistors. It is easy to install and maintain, giving it a long life and making it a reliable component. Through its accurate resistance and reliable performance, the CFR100JR-52-68K can be trusted to deliver reliable results in any application.

The specific data is subject to PDF, and the above content is for reference