CFR100JR-73-110R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors can provide resistance control in circuits with high power. This type of resistor is usually bigger than SMD resistors and has two leads that need to be soldered into the circuit board at opposite ends. One of the types of through hole resistors is CFR100JR-73-110R, which has special features that make it very suitable to be used in certain electric circuits applications. The following discussion will describe the application field and the working principle of CFR100JR-73-110R.

Application Field

CFR100JR-73-110R resistors are used mainly in noise suppression and motor speed control circuits. It is an important component in any noise suppression circuit due to its low temperature coefficient and its low-impedance capacitors that allow it to filter out high-frequency noise. Furthermore, its design makes it very suitable for using in high-powered DC motor speed control circuits. It is ideal in this application because of its low-profile design and its non-inductance construction. This is important because induction from resistors can cause instability and poor power control.

Working Principle

CFR100JR-73-110R resistors operate on the principle of resistance. This means that they can reduce the current in the circuit proportional to the current that is applied. When current is applied, the resistor limits the current that flows through it by generating a voltage drop. The amount of voltage drop is determined by the resistance of the resistor. This means that the voltage drop is proportional to the resistance of the resistor. Therefore, the greater the amount of resistance, the greater the voltage drop will be. Furthermore, the power in the circuit will also decrease in proportion to the resistor’s resistance. This is why these resistors can be used to reduce the amount of current and power in a circuit.

The resistance of CFR100JR-73-110R resistors can be adjusted by altering the distance between its layers or by changing its insert force. Altering the distance between its layers will alter the electrical field in the resistor, which will in turn cause the resistors resistance to change. Similarly, inserting the resistor with greater or lesser force will also affect the resistors resistance. This makes these resistors versatile and adjustable, allowing them to be used in various different applications.

Conclusion

CFR100JR-73-110R is a type of through hole resistor that is used mainly in noise suppression and motor speed control circuits. It has a low temperature coefficient and low-impedance capacitors, making it ideal for these applications. As with other resistors, the resistance can be adjusted by changing its insert force and altering the distance between its layers. Although this type of resistor is not widely used in consumer electronics, it is still an important component in industrial and commercial electric circuits.

The specific data is subject to PDF, and the above content is for reference