CFR100JR-73-1R6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Here is a brief overview of the CFR100JR-73-1R6 Through Hole Resistor and its application field and working principle. The CFR100JR-73-1R6 Through Hole Resistor is a resistive component that is used to control the flow of electricity in circuits. It is a widely used component that is found in many electronic, electrical, and engineering applications. The CFR100JR-73-1R6 Through Hole Resistor has a specific resistance value of 100 ohms and is constructed from two pieces of carbon core material and a ceramic shell or housing. The resistive value of the CFR100JR-73-1R6 Through Hole Resistor is created by the overlapping and the connecting of the two pieces of carbon core material. The characteristics of the CFR100JR-73-1R6 Through Hole Resistor are as follows: it has an operating temperature range of -55 °C to +150 °C, and it has a rated parametric tolerance of 1%. The CFR100JR-73-1R6 Through Hole Resistor also has a rated power of 0.5 watts and a thermal resistance of 7 degrees C/W.

The CFR100JR-73-1R6 Through Hole Resistor requires to be soldered in order to make a circuit connection. The soldering procedure consists of pre-tinning the component lead and spot soldering it to the circuit board, and then soldering the component leads with the actual circuit connection. The pre-tinning procedure provides a stable electrical connection between the component and the circuit board. The CFR100JR-73-1R6 Through Hole Resistor can also be mounted on the circuit board, using a variety of solderless electrical contacts such as the SIPE-K1 wiring connector.

The CFR100JR-73-1R6 Through Hole Resistor can be used in a variety of applications including voltage regulation, current sensing, current limiting, and signal conditioning. It can also be used as a low pass filter to reduce noise, in heating circuits, in motor control, and in power supply circuits. The CFR100JR-73-1R6 Through Hole Resistor is also commonly used in switching circuits and analog circuits.

The working principle of the CFR100JR-73-1R6 Through Hole Resistor can be explained by the famous Ohm\'s law. Ohm\'s law states that the current passing through a resistor is proportional to the applied voltage. This means that the current that flows through the resistor is determined by the voltage applied across its terminals. Therefore, when a voltage is applied across the CFR100JR-73-1R6 Through Hole Resistor, it will cause a proportional current to flow through the resistor. The current that flows through the resistor will be determined by the resistance of the CFR100JR-73-1R6 Through Hole Resistor and the applied voltage.

In conclusion, the CFR100JR-73-1R6 Through Hole Resistor is a commonly used electrical component that is used in many electronic, electrical, and engineering applications. It has a specific resistance value of 100 ohms and requires to be soldered in order to make a circuit connection. The CFR100JR-73-1R6 Through Hole Resistor can also be mounted on the circuit board using a variety of solderless electrical contacts. The working principle of the CFR100JR-73-1R6 Through Hole Resistor can be explained by Ohm\'s law, which states that the current passing through a resistor is proportional to the applied voltage. The CFR100JR-73-1R6 Through Hole Resistor can be used in a variety of applications such as voltage regulation, current sensing, current limiting, and signal conditioning.

The specific data is subject to PDF, and the above content is for reference