CFR200J33R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a type of resistor that is used to limit current in electrical circuits. These resistors are mounted directly onto the printed circuit board (PCB) and soldered at the two leads. This type of resistor is most commonly used in high voltage and temperature applications, as they can withstand extreme temperatures without any failure. The CFR200J33R is a widely used through-hole resistor. It is a precision resistor with a J rating, meaning that it has a tolerance of ± 5%. This type of resistor is designed for precise applications, such as in measuring instruments or other devices that require accurate resistances. The CFR200J33R has a resistance value of 200 Ohms at 25°C, and its temperature coefficient is 25ppm/°C. This means that the resistor’s resistance will change by 25ppm (0.0025%) per °C change in temperature. This resistor is designed to handle high currents while retaining accuracy and minimizing power dissipation. It is capable of handling up to 3 Watts of power dissipation with a 3.6 Ohm contact resistance. As the operating temperature increases, the wattage dissipated by the resistor will decrease. The CFR200J33R has applications in many different fields, including automotive electronics, consumer and industrial electronics, and communications. It can be used in voltage regulators, current limiters, temperature measurement devices, timers, and other types of measuring instruments. The working principle of the CFR200J33R is based on Ohm\'s Law, which states that the current through a resistor is proportional to the applied voltage across it. As the voltage across the resistor increases, so does the current through it. By connecting a resistor into a circuit, the current is then limited to a safe level. This is done by changing the resistance of the resistor, which can be achieved by using higher or lower values of resistance. For example, if an LED is connected to a power source of 5 volts, a resistor with a resistance of 10 Ohms will limit the current to 500mA. By increasing the resistance to 20 Ohms, the current is reduced to 250mA. This type of control is important in applications such as automotive electronics where excessive current can cause damage to components. Overall, the CFR200J33R is an accurate and reliable through-hole resistor that can be used in a wide variety of applications. Its precision tolerance and high-power dissipation rating make it suitable for applications such as measuring instruments and other devices that require accurate resistances. Its high temperature rating makes it suitable for high voltage and temperature applications. Its efficient working principle based on Ohm\'s Law makes it suitable for limiters and controllers.

The specific data is subject to PDF, and the above content is for reference