CFR3WSJT-73-110K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are used in many different electrical and electronic applications as part of the power supply of a device, as part of the circuitry, and in certain cases as a safety feature. A Through Hole Resistor, also known as an axial lead resistor, is a type of resistor assembled in the form of axial pins which protrude from both sides of the resistor body. The Through Hole Resistor is designed to be mounted to a printed circuit board (PCB) or other component and connected to other components on the board. The axial leads of the Through Hole Resistor allow it to be easily inserted into the PCB.One of the more popular models of Through Hole Resistors is the CFR3WSJT-73-110K. This particular model is a 110K Ohm resistor and has two axial pins on each side of the component. The pins have an inner diameter of 0.1” (2.54 mm) and an outer diameter of 0.2” (5.08 mm). The pins are made of a tinned copper material and are sealed in place on the resistor package using a black, non-conductive epoxy material. The pins have small flats on the outer portion of the pin that allow it to be soldered onto the PCB.The CFR3WSJT-73-110K Through Hole Resistor has a power rating of 1/4 Watt and is designed to dissipate 1/4 Watt of power. This particular resistor has a tolerance of 5%, meaning that it can be specified to be accurate within plus or minus 5%. The resistance range of this component is from 0 to 100 Ohms with a temperature coefficient of +500ppm/°C. The operating temperature range of this resistor is -55°C to +125°C.The main purpose of the Through Hole Resistor is to provide resistance in an electrical circuit. The resistance of the resistor determines how much electricity passes through it. By controlling the amount of current in a circuit, the voltage in the circuit can be regulated. The Through Hole Resistor can also be used to create a voltage divider. A voltage divider is a type of circuit in which two resistors are connected in series to divide the voltage in proportion to their resistance.The CFR3WSJT-73-110K Through Hole Resistor is ideal for controlling the voltage in applications such as digital signal processing, analog signal processing, motor control, power supplies, and power converters. It is also used in audio amplifiers, communications, and industrial automation systems. The Through Hole Resistor is also suitable for high frequency applications such as RF circuits and to protect other components from transients.The Through Hole Resistor is a reliable and durable component that has been used in many applications throughout the years. It is an inexpensive component and can provide a reliable signal each time. Due to its efficient use and low cost, the Through Hole Resistor has become a standard part in many modern electronic equipment. It is also easy to assemble and mount to a PCB with minimal effort.Overall, the CFR3WSJT-73-110K Through Hole Resistor has many useful applications. It provides resistance in a circuit, allowing the voltage to be regulated. It can also be used in a voltage divider to regulate the voltage in certain circuits. This component is also available in a variety of sizes and has a wide temperature range, which makes it suitable for a variety of applications. The Through Hole Resistor is a reliable and cost-effective device used to provide reliable signals and protect other components in the system. It can be used in many different applications and is relatively easy to install.

The specific data is subject to PDF, and the above content is for reference