CGA0603MLA-22500E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CGA0603MLA-22500E is a varistor, also known as voltage-dependent resistor (VDR). This type of component is sensitive to voltage, that is, its resistance changes with the applied voltage. It can be used to absorb voltage spikes in power supply lines, protecting downstream electronic components from damage. Since it is a bidirectional device, it can also provide over-voltage protection in either direction, which makes it suitable for protecting both AC and DC power supplies.

Varistors, such as the CGA0603MLA-22500E, operate on the principle of nonlinear electric behavior. When voltage is applied to a varistor, it exhibit a nonlinear voltage-current response, meaning that the current flowing through the device is not proportional to the applied voltage. This nonlinear response is what makes varistors useful for protecting circuits from over-voltage and under-voltage conditions.

The CGA0603MLA-22500E is a nonlinear, bidirectional varistor that is intended for protecting circuits from over-voltage and under-voltage conditions. It is designed for use in AC power lines, and is suitable for applications such as air conditioners, refrigerators, photocopiers, and other types of electrical equipment where voltage spikes and transients have to be absorbed in order to prevent damage to sensitive components.

The CGA0603MLA-22500E is composed of zinc oxide (ZnO) grains and a conductive element formed on a circuit board. When a transient voltage occurs, the ZnO grains expand, creating a short circuit that dissipates the transient voltage energy and thus protects the circuit from voltage spikes. It is also capable of conducting high currents in the opposite direction, providing protection against both over-voltage and under-voltage conditions. In addition, the low-resistance nature of the varistor makes it suitable for high-frequency applications.

The CGA0603MLA-22500E varistor is available in an ultra-small 0603 package, making it suitable for applications where space is limited. It also features a high operating temperature of up to 125 °C, and is rated for up to 22500 volts maximum peak Working Voltage (VMP), making it suitable for high-voltage applications. It also has a low insertion loss, meaning that it almost doesn’t interfere with the signal it is protecting.

The CGA0603MLA-22500E is designed for use in AC power lines, where it can be used to protect sensitive components from power surges and transients. It is an excellent choice for applications where space is limited, and also has the ability to provide protection in either direction, making it suitable for protecting both AC and DC power supplies.

The specific data is subject to PDF, and the above content is for reference