CHPFL-0100-BNC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CHPFL-0100-BNC is a type of RF filter which can be applied in various fields. It is an LC filter with a nominal impedance of 50 ohms and a maximum power rating of 500W. It is designed to filter out undesired signals, such as radio frequency interference (RFI) and other forms of noise, in order to improve the performance of the entire system. The filter has a nominal frequency band of 10.7Mhz to 12.2Mhz and a frequency response of -3dB ± 1dB over this range.

In terms of its application fields, some of them include base stations, radio receivers, cellular phones, and satellite communications. All of these require the filter to filter out unwanted signals that could interfere with the proper functioning of the systems. Thus, the filter must be able to provide clean power output and reduce the level of noise introduced to the systems.

With respect to the working principle of CHPFL-0100-BNC, basically the filter passes signals within a certain frequency range while attenuating signals outside of this range. This is achieved by the use of inductors, capacitors, and/or resistors connected to the filter input and output. When a signal enters the filter, it passes through the components before emerging at the filter output. The components act as a barrier, absorbing or reflecting any signals outside of the specified frequency range.

As a result of this mechanism, CHPFL-0100-BNC is able to effectively reduce the amount of unwanted signals that exist in the system, while at the same time preventing any interference from outside sources to affect the system’s performance. Furthermore, it is designed to take up minimal space and is easy to install. Thus, overall it is a highly reliable and efficient filter.

In summary, CHPFL-0100-BNC is an RF filter which is designed to reduce the amount of unwanted signals present in the system. It can be used in various fields, such as base stations, radio receivers, and cellular phones, all of which require good signal to noise ratio in order to function properly. The filter utilizes inductors, capacitors, and resistors to filter out any undesired signals. In addition, it is highly efficient and relatively small, making it easy to install.

The specific data is subject to PDF, and the above content is for reference