CIGW201610GL2R2MLE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CIGW201610GL2R2MLE, or Chip Inductors, are classified as Fixed Inductors and find wide application in the electronics industry. They are popularly used as line filters, automotive filters, output filters, phase attenuators, and DC-DC converters. The components are widely used in the telecom, automotive, and consumer electronics markets.

The most obvious applications of the CIGW201610GL2R2MLE include providing DC blocking, reducing RF interference, and stabilizing the electrical signals that flow through and around the circuit board. By using these devices, it is possible to maintain the quality of the signal within acceptable limits and thus avoid time-consuming re-work.

In a typical circuit application, the fixed inductor acts as an inductive element. Inductance is a measure of the opposition that a coil of wire offers to changes in the current flowing through it. When current flowing in one direction is changed to current flowing in the opposite direction, energy is stored in the magnetic field around the inductor. When the current is changed again, the stored energy is released in the form of a voltage.

The current and voltage relationship in an inductor is defined by Faraday’s law of induction. This law states that the rate of change of the magnetic field surrounding the inductor causes an induced voltage. The equation for the voltage, i.e. the voltage drop across the inductor, is given below:$$V_{L}= -L \frac {di}{dt} $$Where,$V_L$ is the voltage across the inductorL is the inductance, measured in Henrys$di/dt$ is the rate of change of the current, which is the second derivative of the current with respect to time.

The output of the inductor is related to its input by an equation shown below:$$ i(t)= -C \frac {dV}{dt}-L \frac {di}{dt}$$Where,$ i(t)$ is the output currentC is the capacitance$dV/dt$ is the rate of change of the voltage$di/dt$ is the rate of change of the current

In terms of practical applications it is useful to note that inductors tend to offer more resistance to low-frequency signals than to high-frequency signals. This is due to the coil’s self-inductance which will cause the coil to dissipate energy in the form of heat as current flows through it. This resistance to low-frequency signals makes the inductor ideal for use in power supplies where it will help reduce the current that needs to pass through the circuit.

Another important benefit of using inductors is that they offer significant impedance matching capabilities. This means that it is possible to provide impedance matching between two components at one end of a cable, and two components at the other end. This helps maintain signal integrity and ensures high-quality performance.

Overall, the CIGW201610GL2R2MLE is a highly versatile component that can be used to increase the functionality of many different types of circuits. It is especially useful in applications where it is necessary to reduce or eliminate RF interference, or where impedance matching needs to be provided. The component also offers easy installation and maintenance, making it an increasingly popular choice in many modern electronics designs.

The specific data is subject to PDF, and the above content is for reference