CIL10Y5R6KNC

Q @ Freq:	35 @ 4MHz
Height - Seated (Max):	0.037" (0.95mm)
Size / Dimension:	0.063" L x 0.031" W (1.60mm x 0.80mm)
Supplier Device Package:	0603 (1608 Metric)
Package / Case:	0603 (1608 Metric)
Mounting Type:	Surface Mount
Features:	--
Inductance Frequency - Test:	4MHz
Operating Temperature:	-40°C ~ 85°C
Ratings:	--
Frequency - Self Resonant:	22MHz
Series:	CIL10
DC Resistance (DCR):	1.55 Ohm Max
Shielding:	Shielded
Current - Saturation:	--
Current Rating:	5mA
Tolerance:	±10%
Inductance:	5.6µH
Material - Core:	Ferrite
Type:	--
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are components that store energy in the form of a magnetic field when a current is applied. The CIL10Y5R6KNC is an example of a fixed inductor that is widely used in modern applications. This component is a high-power inductor, suitable for electronic applications that require up to 10A of current.The CIL10Y5R6KNC is a conventional, through-hole inductor that is composed of a cylindrical metal core, wound with a coil of copper wire. The metal core is usually made of iron or ferrite, and the copper wire is generally insulated with plastic. These components have two terminals that allow electrical connections to be made between circuits or devices. The amount of inductance, measured in Henrys (H), is determined by the size of the core, the number of turns in the coil, and the material used for the core and coil. The CIL10Y5R6KNC has an inductance of 20mH. The components are usually rated with specific tolerances, such as +/-5%, +/-10% or +/-20%. This rating refers to the amount of error between the specified value and the actual value of the inductance. This type of inductor is designed to store and release energy at specific frequencies, such as those used in radios or television receivers. The stored energy can be used to filter out noise or interference in these applications. The component can also be used as a power-supply filter to reduce the level of ripple voltage in power supplies. It is also used in motor controllers and other high-power applications. The working principle of the component is relatively simple. When an alternating current flows through the inductor, the core material is magnetized, and a corresponding magnetic field is generated. This magnetic field stores the energy from the alternating current, and any changes in the current will cause the magnetic field to flux, which creates a corresponding voltage in the inductor.The stored energy can later be released when the current is changed. When the flow of electrons is blocked, the magnetic field will collapse and an opposite current will flow in the opposite direction as the original current. This current is known as the back-emf, and it is the component’s ability to store and release energy that makes it a useful component. The CIL10Y5R6KNC can be used in applications where high power is required. It is relatively tolerant of temperature variations, and can operate in a temperature range of -40°C to +125°C. Its high thermal efficiency and relatively small size make it a suitable component for a range of high-power applications, such as motor controllers, power supplies and radio receivers.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description