CINT1175A2406K01

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC/DC converters are designed to convert electrical currents from Alternating Currents (AC) to Direct Currents (DC). This is done through a rectification process, which is a form of electrical power conditioning that changes the form of the electrical signal. AC current is typically used to transfer power from long distances with minimal energy losses while DC current is necessary to power most electronic devices. CINT1175A2406K01 is a three-phase AC/DC converter specifically designed to provide a high-power output with extremely low harmonic distortion.

It is a product derived of a state-of-the art IGBT-based topology, featuring High-Power Factor (HPF), Soft Current Limit (SCL), Wide Operating Range (WOR) and Integral Current Sensor (ICS). At the same time, the unconventional modulation strategy is used to ensure low Total Harmonic Distortion (THD) and Low Conducted EMI level.

The CINT1175A2406K01 can be used in applications such as motor drive, UPS, PVG systems, HVAC and welding machines. It is also used in battery applications, electrical vehicles and railway traction systems, among others. It provides an extended range of input voltages to accommodate different system requirements and supports power flexibility, allowing for peak powers to be supplied without compromising efficiency.

This AC/DC converter works by taking a sine wave AC signal and rectifying it into a continuous unidirectional output. This is done using a rectifier, which is a device that converts AC power into DC power. The transformer is used to step down the voltage of the input AC voltage before it is fed into the rectifier. The rectifier then takes the AC voltage and converts it into pulsating DC voltage that is then fed into the filter. This filter is responsible for removing any remaining AC ripple that could interfere with the smooth output. Finally, the DC voltage is sent to the output.

By using Pulse Width Modulation (PWM) and Synchronous Rectification (SR), the CINT1175A2406K01 AC/DC converter is able to achieve the highest efficiency and the lowest harmonic content. PWM is a technique used to process electrical signals by switching them on and off at a very high frequency. This process generates a high switching frequency that is used to generate a low distortions sine wave at the output. At the same time, SR is used to reduce switching losses and harmonic content. By using the complementary techniques of PWM and SR, the CINT1175A2406K01 is able to achieve very low harmonic content and very high efficiency.

In summary, the CINT1175A2406K01 AC/DC converter is designed to provide an efficient and reliable performance for a wide variety of applications. It is capable of delivering high-power outputs with a low harmonic content, and is compatible with a wide range of input voltages. This makes it suitable for applications such as motor drive, UPS, PVG systems, HVAC and welding machines, among others. Its use of pulse width modulation and synchronous rectification techniques also allow it to achieve very low harmonic content and high efficiency.

The specific data is subject to PDF, and the above content is for reference