CIR030AF-18-10P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CIR030AF-18-10P is a transistor module commonly used in radio frequency (RF) applications. It is used in radio receivers, transmitters, transceivers and amplifiers. It is used as a driver for powering high-power radio frequency devices such as amplifiers. It is also used in the design of high-end digital receivers.

A transistor module is a combination of individual transistors that are built into a single package. CIR030AF-18-10P contains two transistors in a single package. It has a maximum operating frequency range of up to 1.25 MHz and an operating voltage range of 0.8 to2V. Its typical gain is about 15 dB at 1 MHz.

The CIR030AF-18-10P is typically used in RF applications where a high-power amplifier is needed. It can be used as the driver in a high-power amplifier. The transistor module is connected to a power supply and the amplifier output is fed back into the module. The transistor module takes the input signal and drives it at a higher level of power to the amplifier. This increases the power of the output signal without causing any distortion. The output can be sent to a radio antenna or to other receivers.

In addition to amplifying the signal, the CIR030AF-18-10P can also be used for creating low-noise filters. By using the transistors as opposing input and output elements, the module can block out any unwanted signals. The module can also be used to fabricate various amplifier circuits and signal processing circuits. The application field of this transistor module is quite versatile.

The working principle of the CIR030AF-18-10P is quite simple. The signal is applied to the input stage and then amplified by the transistor. The amplified signal is passed to the output stage where it is further amplified and sent out of the module. The transistor module consists of two transistors that are internally connected. The transistor that drives the power amplifier can be powered by a DC voltage. The output transistor is also powered with the same voltage.

The CIR030AF-18-10P transistor module is a great choice for RF applications. It can be used as the driving element for powering high-power radio frequency devices such as amplifiers. It can provide low-noise filters and can also be used to fabricate amplifier circuits. It is a great choice for any RF application and can bring excellent performance when used properly.

The specific data is subject to PDF, and the above content is for reference