CIR06-18-4PW-F80

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CIR06-18-4PW-F80 is a 4-pole, passive RC type EMI filter, used for reducing EMI in various types of Low voltage DC power supply applications. This type of filter is capable of providing great attenuation of EMI in a frequency span ranging from 150kHz to 30MHz. It is designed to be inserted into a power line between an AC or DC power source and a load. The CIR06-18-4PW-F80 is a simple and inexpensive way of controlling EMI in applications including DC motor controls, lighting controls, computer peripherals, and DC power supplies.

An EMI filter is an active or passive electrical device utilized for controlling EMI interference. It works by introducing a degree of impedance, usually in the form of a resistor, an inductor, or even a combination of the two, to a power line or signal line. This introduces a significant amount of current-limiting resistance, which effectively limits the amount of EMI that can penetrate further throughout the system, and thus reduces the amount of unintended disturbances. The impedance is usually adjusted by varying the resistors or inductors in the circuit.

The CIR06-18-4PW-F80 works by introducing a capacitive reaction within the filter. The capacitors act as a resistor to conductive noise, typically electrical or radio frequencies, reducing their slow buildup and spreading of energy throughout the system. A resister works in the similar way, acting as an impedance to slow and hinder the energy transmission. Together, both components of the filter work together to reduce EMI levels in the system, keeping the power line safe and clear of interference.

The CIR06-18-4PW-F80 is suitable for applications where the power line voltage is 5V, 12V, or 24V. It is also suitable for applications where the power line current may be up to 8A. This type of filter has an insertion loss of 5dB, meaning that it can reduce the amount of EMI by up to 5dB within its frequency range.The CIR06-18-4PW-F80 is designed as a plug-in type filter, meaning that it can easily be inserted into the power line without the need for cutting or splicing the power wires. The filter is packaged nicely in a compact chassis, making it easy to fit into tight spaces. It also features an IP67 rated dielectric strength sleeve that offers protection from dust and water.

The CIR06-18-4PW-F80 can be used in a wide variety of applications, including: motor drives, computer peripherals, lighting controls, DC power supplies, robots, PLCs, power tools, industrial controllers, or any other system that requires EMI filtering. It is particularly well suited for applications in the consumer electronics industry, as it helps to reduce the amount of EMI in consumer electronics devices without compromising the performance of the device.

The CIR06-18-4PW-F80 is a simple, affordable and effective way of controlling EMI in many different applications. It is easy to install, providing the user with the ability to quickly and easily reduce EMI in their system. The CIR06-18-4PW-F80 is an efficient, cost-effective EMI filter that can help protect your system from potential EMI interference or damage.

The specific data is subject to PDF, and the above content is for reference