CKCL22C0G1H470K085AL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A capacitor network, or array, is a complex electrical circuit consisting of multiple capacitors that are connected in a specific manner. The CKCL22C0G1H470K085AL is a capacitor network composed of two capacitors whose capacitance values vary depending on the type of capacitor chosen.

Capacitors are components that store electric charge. They are generally made up of two metal plates separated by an insulating material known as a dielectric. The capacitance of a capacitor is the amount of charge it can store and is measured in Farads. The CKCL22C0G1H470K085AL has two capacitors with capacitance values of 22nF and 0.47UF respectively.

The application of the CKCL22C0G1H470K085AL depends on the type of capacitor chosen. This capacitor network is generally used as a filter, where one of the capacitors is connected to the power supply while the other is connected to ground. The filter can be used to block or pass certain frequencies. Because this network of two capacitors has two selectable values, the type of filter can be adjustable.

The CKCL22C0G1H470K085AL capacitor network can also be used as a coupling device, for example in a radio transmitter or receiver. In such an application, one of the capacitors would be connected to the transmitter and the other to the receiver. The capacitors act as a buffer, allowing signals from the transmitter to pass through the capacitors and reach the amplifier, while blocking out any noise signals. This helps to reduce interference between the transmitter and receiver.

The working principle of the CKCL22C0G1H470K085AL is relatively straight-forward. As current passes through the circuit, it is drawn towards the two capacitors. When one capacitor reaches a certain level of charge, its capacitance increases, while the other capacitor’s capacitance decreases. This results in an alteration of the electrical charge in the circuit. Depending on the type of capacitor chosen, the circuit will adjust the passed or blocked frequencies accordingly.

In summary, the CKCL22C0G1H470K085AL is a capacitor network composed of two capacitors with capacitance values of 22nf and 0.47uf. It can be used as a filter or as a coupling device, blocking or passing certain frequencies as needed. The working principle of the circuit is relatively simple and is based on the fact that the capacitors’ capacitance values vary with the amount of charge in the circuit.

The specific data is subject to PDF, and the above content is for reference