CKCM25X5R0J105M080AA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Capacitor networks and arrays are commonly used in a wide range of electronic circuits, from RF and microwave applications to audio and digital signal conditioning. CKCM25X5R0J105M080AA is one of the most popular capacitor networks used for these applications. This capacitor works by using five capacitors of different values in parallel. These capacitors are connected in a way that the capacitance value is the sum of all five capacitors.

The CKCM25X5R0J105M080AA is able to provide a total capacitance value of 0.105 μF and a working voltage of 16V. The capacitors are designed to be used in primarily DC or low frequency applications and operate within a temperature range of -55ºC to +125ºC. Additionally, the CKCM25X5R0J105M080AA has a rated dissipation factor of 0.15 at 1 MHz. The dielectric strength of the device is 100Vrms and is capable of withstanding high surge currents of up to 6000 μF.

CKCM25X5R0J105M080AA can be used in a variety of applications, including audio pre-amplifiers, equalizers, buffered power supplies, and switched capacitor networks. Additionally, these capacitors are useful for filtering high frequency signals, such as RF signals. The capacitors are also ideal for creating noise cancellation networks in audio applications.

The working principle of CKCM25X5R0J105M080AA is similar to that of other capacitor networks. The five capacitors are connected in parallel, so the total capacitance is the sum of the individual capacitor values. As current flows through the network of five capacitors, it is distributed among the five capacitors according to their relative capacitance values. The amount of current flowing through each capacitor is then effectively determined by the capacitance value of that particular capacitor.

Due to the nature of capacitors, the current distribution changes as the frequency of the signal or current changes. A higher frequency signal or current will be distributed more evenly among all five capacitors instead of just one or two capacitors. This even distribution helps to reduce distortion and noise, as the current is spread over the five capacitors, instead of concentrating on one or two.

In summary, the CKCM25X5R0J105M080AA is a popular capacitor network that is used in a number of applications and is capable of providing a total capacitance of 0.105 μF. The five capacitors are wired in parallel and the total capacitance is the sum of the individual capacitors. The capacitors are suitable for use in DC or low frequency applications and are designed to withstand high surge currents. The network is also capable of providing even current distribution, which helps to reduce distortion and noise in audio and other applications.

The specific data is subject to PDF, and the above content is for reference