CKSR 50-NP Sensors, Transducers |
|
Allicdata Part #: | 398-1098-5-ND |
Manufacturer Part#: |
CKSR 50-NP |
Price: | $ 0.00 |
Product Category: | Sensors, Transducers |
Manufacturer: | LEM USA Inc. |
Short Description: | SENSOR CURRENT FLUX 50A AC/DC |
More Detail: | Current Sensor 50A 1 Channel Flux Gate, Closed Loo... |
DataSheet: | CKSR 50-NP Datasheet/PDF |
Quantity: | 680 |
Frequency: | 300kHz |
Package / Case: | Module |
Mounting Type: | Through Hole |
Polarization: | Bidirectional |
Operating Temperature: | -40°C ~ 105°C |
Current - Supply (Max): | 20mA |
Response Time: | 0.3µs |
Voltage - Supply: | 4.75 V ~ 5.25 V |
Accuracy: | ±0.8% |
Linearity: | ±1% |
Series: | CKSR |
Sensitivity: | 12.5mV/A |
Output: | Ratiometric, Voltage |
Number of Channels: | 1 |
Current - Sensing: | 50A |
Sensor Type: | Flux Gate, Closed Loop |
For Measuring: | AC/DC |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A current transducer is an electronic device that is used to measure the amount of electrical current in an alternating current (AC) circuit, and can be used for industrial applications. The CKSR 50-NP is a type of current transducer which is designed to measure the amount of current in a wide range of AC circuits. It is a relatively simple device which is made up of a transformer, a rectifier, and a passive resistor in series with a voltage source.
The transformer in the CKSR 50-NP is designed to be a single phase, dual wound transformer, where one winding is used to sense the primary current, and the other winding to sense the secondary current. The primary current winding is then connected to a rectifier, which converts the alternating current into a direct current. The secondary current is then connected to a passive resistor, which is used to determine the voltage drop across the resistor. This voltage is then used to calculate the amount of current flowing in the circuit.
The CKSR 50-NP is typically used in applications where a high degree of accuracy is needed, such as in power plants, oil refineries, and metering applications. It is also used in industrial automation systems, where it can be used to monitor the power levels in the system, and also to detect any potential changes in the system.
The working principle of the CKSR 50-NP is fairly simple. The primary current is sensed and converted to a direct current, and then sent to the resistor. The voltage drop across the resistor is then used to calculate the amount of current in the circuit. This information is then used to accurately measure the current in the circuit.
The CKSR 50-NP is an excellent choice for industrial current transducers, as it is designed to be very accurate, and is relatively simple to install and use. It is also relatively affordable, making it a cost-effective option for most applications. The CKSR 50-NP is also well suited for a wide variety of applications, such as testing of electrical systems, monitoring power levels, and detecting changes.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
CKSR 25-NP | LEM USA Inc. | 12.28 $ | 2777 | SENSOR CURRENT FLUX 25A A... |
CKSR 15-NP | LEM USA Inc. | 12.48 $ | 1060 | SENSOR CURRENT FLUX 15A A... |
CKSR 6-NP | LEM USA Inc. | 12.48 $ | 505 | SENSOR CURRENT FLUX 6A AC... |
CKSR 50-NP | LEM USA Inc. | -- | 680 | SENSOR CURRENT FLUX 50A A... |
SENSOR CURRENT XFMR 40A ACCurrent Sensor...
SENSOR CURRENT XFMR 5A ACCurrent Sensor ...
SENSOR CURRENT HALL 15A AC/DCCurrent Sen...
3 PIECE KIT SENSOR CURRENT HALLCurrent S...
PACT RCP-4000A-1A-D190Current Sensor 100...
SENSOR CURRENT HALL 30A DCCurrent Sensor...