CLF7045T-100M

DC Resistance (DCR):	45.6 mOhm Max
Height - Seated (Max):	0.189" (4.80mm)
Size / Dimension:	0.283" L x 0.272" W (7.20mm x 6.90mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-40°C ~ 105°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	CLF
Shielding:	Shielded
Current - Saturation:	2.7A
Current Rating:	2.5A
Tolerance:	±20%
Inductance:	10µH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Last Time Buy
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Fixed Inductors

Inductors are electrical elements that store energy in a magnetic field. They are typically used as components of a larger circuit, such as an amplifier or other electronic system. An inductor is defined by the number of coils, the core material, the winding type, and the inductance. Fixed inductors are designed to have a fixed impedance at a given frequency.

CLF7045T-100M

CLF7045T-100M is a surface-mount inductor made of a ferrite core and enameled copper wire. It is a 100uH, with a 0.60A current rating and 0.07 Ohm DC resistance. The product is also rated to withstand up to 1100V maximum voltage.

Application Field and Working Principle

The CLF7045T-100M is suitable for use in many different applications such as power supplies, DC/DC converters, and distributed power systems. It provides high energy efficiency and is highly reliable.The working principle behind fixed inductors is based on the law of induction, which states that a current flowing through an inductor will create a magnetic field. This magnetic field in turn induces a voltage in the inductor, which is called back EMF.The amount of voltage induced in the inductor depends on the inductance and the amount of current flowing through it. The back EMF produces a force against the current, and this is called inductive reactance. The inductive reactance is frequency-dependent, so the inductor behaves different at different frequencies.At low frequencies, the inductor appears to be a short circuit, with no impedance. At higher frequencies, the inductor appears to be an open circuit, with infinite impedance. These properties make fixed inductors ideal for applications that require precise control over input and output voltages.The CLF7045T-100M can also be used in AC circuits, where it acts as a filter, separating signals of different frequencies, or in switching power supplies, where it is used to store energy in a magnetic field during the switch-on phase.

Conclusion

The CLF7045T-100M is a fixed inductor that is suitable for a variety of applications. It has a ferrite core and enameled copper wire, and is rated for 0.60A current rating and 0.07 Ohms DC resistance. It can be used in AC and DC circuits, where its properties make it ideal for precise control over voltages. It can also be used in switching power supplies, where it is used to store energy in a magnetic field.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description