CLS5D11HPNP-220NC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electrical components with coils of wire wrapped around a core material. Their primary purpose is to create an inductance between the source and load. The inductance created helps to control the flow of the current or voltage in circuits. The two main types of fixed inductors are air core and ferrite core. The CLS5D11HPNP-220NC is an air core fixed inductor.

The CLS5D11HPNP-220NC is an air core inductor with an inductance of 220nH. It is a radial component with an overall size of 5.11mm. The inductor carries a voltage rating of 100V and a rated current of 1.0A. The DC resistance for the CLS5D11HPNP-220NC is 33mΩ. The inductance tolerance of the part is +20/-20%.

The application fields for the CLS5D11HPNP-220NC inductor include power supplies, bridge rectifiers, switching regulators, and signal shielding. The inductor is also used for high frequency circuits, especially those that require low levels of power consumption and low noise.

The working principle of a fixed inductor is based on Faraday\'s Law of Induction, which states that a voltage induced in a circuit is proportional to the rate of change of the magnetic flux. In an inductor, an electric current creates a magnetic field which in turn induces a voltage. A fixed inductor is designed to be efficient at storing energy in a magnetic field which is then released as electrical energy.

Fixed inductors can also be used to reduce the current flowing through a circuit. This is achieved by creating an electrical impedance to the flow of current. This means that the inductor acts as a resistance to the current which is known as an inductive reactance. An inductor\'s inductive reactance increases with frequency.

The CLS5D11HPNP-220NC is designed to reduce the amount of current flowing in high frequency circuits while also providing low levels of power consumption and noise. The inductor features an air core which ensures a consistent inductance and low losses. It is well-suited for signal shielding applications where low levels of noise and current are desired.

In conclusion, the CLS5D11HPNP-220NC is an air core fixed inductor with an inductance of 220nH. The inductor is suitable for a variety of applications including power supplies, bridge rectifiers, switching regulators, and signal shielding. The working principle of the inductor is based on Faraday\'s Law of Induction. The inductor can reduce the current flowing in high frequency circuits and is designed for low levels of power consumption and noise.

The specific data is subject to PDF, and the above content is for reference