CM1011R-104

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes

A common mode choke is an electrical component designed to limit current flow in all directions while blocking significantly higher frequency signals from being transmitted. Common mode chokes are most commonly used to block undesired electromagnetic interference (EMI) and radio frequency interference (RFI) from entering or leaving a circuit, and are designed to prevent a large degree of common mode current flow. Basic common mode choke designs consist of two or more ferrite cores wound with a coil of tightly wound insulated wire.

The CM1011R-104 is a common mode choke designed to limit current flow in all directions, while allowing the transmission of higher frequency signals. This makes it an ideal device for applications where higher bandwidth signals, such as RF signals, need to pass through without losing too much power. The CM1011R-104 can also reduce the effects of noise and interference in a signal, ensuring improved signal integrity.

Application Fields

The CM1011R-104 is most commonly used in communication systems, where it provides common mode noise isolation to help reduce interference while also providing some suppression of higher frequency signals. It can help to protect equipment from damage due to electrical overstress, and provides improved signal performance as well as superior EMI and RFI protection.

Common mode chokes are also used in power electronics applications, such as power inverters, where they are used to reduce the spread of harmonics and reduce EMI. In such applications, the CM1011R-104 can provide improved power quality by reducing harmonic noise, as well as reducing the risk of overvoltage and overcurrent conditions.

The CM1011R-104 is also suitable for automotive applications, where it is used to reduce unwanted signals and protect against electrical damage. The device is used to reduce unwanted engine and drivetrain noise, as well as providing protection from electromagnetic interference. It is also used to reduce the effects of high-speed switching noise that can interfere with other automotive systems.

Working Principle

The CM1011R-104 is a passive component, meaning it does not require power to perform its intended purpose. The device consists of two or more ferrite cores, each of which is wound with a copper coil. This creates an inductor-like effect which results in a higher impedance to the high frequency signals, while offering minimal interference to lower frequency signals.

The device is designed to allow the higher frequency signals to pass through with minimal attenuation, while blocking or significantly attenuating the lower frequency signals. The degree of attenuation is dependent upon the characteristics of the choke, with an increased number of coils providing greater attenuation of lower frequency signals.

The CM1011R-104 provides excellent levels of common mode signal filtering, and is highly effective at reducing EMI and RFI as well as other unwanted signals. In addition, it is also highly effective at suppressing harmonic noise, reducing the risk of electrical damage in power electronics applications.

The specific data is subject to PDF, and the above content is for reference