CM453232-R39ML

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

The CM453232-R39ML is a type of fixed inductor, which is an electronic component used to add inductance to a circuit. It is typically made from a coil of wire wound around a core which can be either a permanent magnet or an iron core. The CM453232-R39ML has a flat, round shape and is typically small enough to fit into a through-hole or surface-mount device. It is suitable for a range of applications, including power supply, signal routing, and voltage regulation.

Application Field and Working Principle

Fixed inductors, such as the CM453232-R39ML, commonly find use in electronic circuits where inductance is required. This can be for power supply filtering, signal routing, and voltage regulation. For instance, in power supplies, the inductor will help reduce voltage ripple by storing and then releasing energy as the voltage fluctuates. In signal routing, inductors are used to block certain frequencies while allowing others to pass. These signals can also be amplified with an inductor. On the other hand, inductors also find use in voltage regulation, where they are used to transform input voltages to output voltages of differing levels. When used for voltage regulation, an inductor often works in conjunction with other components, such as diodes and transistors, to stabilize the voltage.

When in operation, an inductor acts as a battery for DC current. It stores energy in the magnetic field generated by the coil of wire, which acts as an electromagnetic field when current flows through the coil. As the current passes through the inductor, it creates a voltage, which can then be put to use in various applications. For instance, when used in power supplies for voltage regulation, the voltage generated by the inductor will be used to power the load (e.g. a motor).

Although the CM453232-R39ML may look similar to a transformer, it is important to note that the two components are quite different. A transformer is a passive device used to transfer energy in an electrical system, whilst an inductor is an active device used to regulate and amplify signals. As such, transformers and inductors are used for very different applications.

Composition and Limitations

The CM453232-R39ML consists of a coil of wire and a core. The core serves to increase the inductance of the device and can be a permanent magnet or an iron core. The coil of wire in the inductor is responsible for the generation of the electromagnetic field. The number of turns of the coil, as well as the diameter and length of the wire, all affect the inductance of the device. The CM453232-R39ML has an inductance rating of 39 mH.

Inductors, such as the CM453232-R39ML, have certain limitations. Firstly, these components are passive devices, so they cannot amplify signals by themselves. Secondly, the inductance of the device is limited by its size, as the power handling capability and frequency response are also limited. Additionally, the device is susceptible to electromagnetic interference (EMI), so it must always be covered by a shield.

Conclusion

The CM453232-R39ML is a type of fixed inductor commonly used in electronic circuits for power supply filtering, signal routing, and voltage regulation. It consists of a coil of wire wound around a core, and it functions by storing and then releasing energy as the current passes through the coil. Although it has certain limitations, a fixed inductor is still an essential component for many electronic circuits.

The specific data is subject to PDF, and the above content is for reference