CM5740Z241B-10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes are passive component filters used to eliminate (or reduce) differential mode noise signals on pairs of signal lines. This type of device is often referred to as a Line Filter, though the terms are sometimes used interchangeably.

The CM5740Z241B-10 is an inductor-based Common Mode Choke offering wideband operation with low in-band leakage and good EMI suppression. The CM5740Z241B-10 is designed to provide a high level of isolation between differential mode signals and common mode signals. The high inductance of the device ensures that common mode EMI is suppressed over a wide frequency range.

In a typical application, the CM5740Z241B-10 is inserted into the circuit to prohibit any high-frequency differential-mode signals from passing through. This reduces the amount of electrical interference that the signal lines are exposed to, thus preventing any potential problems. The choke is also capable of reducing common-mode interference, which can result in noise and crosstalk.

The working principle of the CM5740Z241B-10 is the same as that of any other Common Mode Choke, which is to reduce differential-mode interference. When two signal lines are connected in parallel with the CM5740Z241B-10 installed in-between them, any common mode signals flowing along the two lines will induce a current in the choke. This current is opposed by the inductance of the choke, thus reducing the level of the signals.

The CM5740Z241B-10 can be used in a variety of applications including the reduction of differential-mode noise on data transmission lines, RF antenna systems, EMI filter circuits, and power supply noise suppression. In each of these applications, the choke works to suppress unwanted electromagnetic interference, ensuring a clean and reliable signal.

Common Mode Chokes such as the CM5740Z241B-10 offer high levels of differential mode noise suppression and common mode interference reduction, making them a valuable addition in any noise reduction system. Their ability to interfere with both differential and common mode signals makes them a great choice for a variety of applications and their wideband operation ensures they can be used over a range of frequency bands.

The specific data is subject to PDF, and the above content is for reference