Allicdata Part #: | CMF601M3200DHEK-ND |
Manufacturer Part#: |
CMF601M3200DHEK |
Price: | $ 0.80 |
Product Category: | Resistors |
Manufacturer: | Vishay Dale |
Short Description: | RES 1.32M OHM 1W .5% AXIAL |
More Detail: | 1.32 MOhms ±0.5% 1W Through Hole Resistor Axial Fl... |
DataSheet: | CMF601M3200DHEK Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 0.72293 |
300 +: | $ 0.61965 |
500 +: | $ 0.51638 |
1000 +: | $ 0.44753 |
5000 +: | $ 0.43376 |
Series: | CMF |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 1.32 MOhms |
Tolerance: | ±0.5% |
Power (Watts): | 1W |
Composition: | Metal Film |
Features: | Flame Retardant Coating, Moisture Resistant, Safety |
Temperature Coefficient: | ±50ppm/°C |
Operating Temperature: | -55°C ~ 175°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.145" Dia x 0.344" L (3.68mm x 8.74mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to Through Hole Resistors and CMF601M3200DHEK
A through hole resistor is a common component used in both low-power and high-power electrical and electronic devices. They are typically soldered directly to a printed circuit board (PCB). The through hole resistor is made up of a metal oxide film that has been sputtered onto a substrate; then the solder is applied to the substrate. Its application involves the selection, distribution, and cancellation of transmitted and reflected energy.
A CMF601M3200DHEK belongs to the CMF series of resistors. It is a precision through-hole resistor, designed to operate in high-frequency applications. Its ability to precisely adjust resistance in time-saving circuit boards is the primary point of its application in electrical and electronic circuit design.
Applications of CMF Series Through Hole Resistors
CMF series through hole resistors are widely used in radiofrequency devices such as power supplies, amplifiers, high-frequency filters, attenuators, and oscillators. These resistors are especially suitable for high-frequency applications due to their high-frequency stability and low temperature drift. In addition, they are also used in RF shields, energy transmission systems, and impedance matching circuits.
The CMF601M3200DHEK is also suitable for high-voltage applications, where the power supply is typically over 16V. Due to its high accuracy and high frequency stability, the resistor helps to eliminate any signal losses that may occur during high-temperature operation or when the device is exposed to moisture or vibration.
Working Principle and Advantages of CMF Series Through Hole Resistors
The working principle of CMF series through hole resistors is based on sputtering a metal oxide film on to a substrate. This film serves as the resistor element, and the substrate acts as a heat sink. In addition, the resistors feature a high-temperature wire that is embedded in the substrate to provide additional protection.
The resistors are designed to reduce the risk of signal discontinuities by having a high vibration and shock resistance. The integrated wire and substrate combination also helps to better manage temperature changes, so that greater accuracy is maintained over the operational lifetime of the device. Furthermore, because of their low temperature coefficient of resistance (TCR) ratings, the CMF series resistors help to ensure that the device produces precise results, even under variable loads.
The other benefits of CMF series through hole resistors are their ability to sustain high operating temperatures, their high insulation resistance ratings, and their excellent shielding characteristics. The resistors also feature low current and power dissipation, so that they can provide precise results in even the most demanding applications.
In Summary
In summary, through hole resistors, such as the CMF series through hole resistors, are designed for high-frequency applications. They provide precise resistance levels at high frequencies and enable precise adjustments. The CMF601M3200DHEK is a precision through hole resistor that is suitable for high-voltage applications. It features low temperature drift, high-frequency stability, and low current and power dissipation, making it suitable for high-temperature and high-humidity operations.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
CMF601M2100DHBF | Vishay Dale | 0.8 $ | 1000 | RES 1.21M OHM 1W .5% AXIA... |
CMF601M2100DHEK | Vishay Dale | 0.8 $ | 1000 | RES 1.21M OHM 1W .5% AXIA... |
CMF601M3200DHBF | Vishay Dale | 0.8 $ | 1000 | RES 1.32M OHM 1W .5% AXIA... |
CMF601M3200DHEK | Vishay Dale | 0.8 $ | 1000 | RES 1.32M OHM 1W .5% AXIA... |
CMF6510K000CEBF | Vishay Dale | 0.83 $ | 1000 | RES 10K OHM 1.5W 0.25% AX... |
CMF6510K000CEEK | Vishay Dale | 0.83 $ | 1000 | RES 10K OHM 1.5W 0.25% AX... |
CMF65332K00CEEK | Vishay Dale | 0.83 $ | 1000 | RES 332K OHM 1.5W 0.25% A... |
CMF651M1300FHBF70 | Vishay Dale | 0.86 $ | 1000 | RES 1.13M OHM 1.5W 1% AXI... |
CMF651M1300FHEK70 | Vishay Dale | 0.86 $ | 1000 | RES 1.13M OHM 1.5W 1% AXI... |
CMF65100K00BEBF | Vishay Dale | 0.86 $ | 1000 | RES 100K OHM 1.5W 0.1% AX... |
CMF65100K00BEEK | Vishay Dale | 0.86 $ | 1000 | RES 100K OHM 1.5W 0.1% AX... |
CMF6510K000BEBF | Vishay Dale | 0.86 $ | 1000 | RES 10K OHM 1.5W 0.1% AXI... |
CMF6510K000BEEK | Vishay Dale | 0.86 $ | 1000 | RES 10K OHM 1.5W 0.1% AXI... |
CMF6510R000BEEK | Vishay Dale | 0.86 $ | 1000 | RES 10 OHM 1.5W 0.1% AXIA... |
CMF65111K00BEBF | Vishay Dale | 0.86 $ | 1000 | RES 111K OHM 1.5W 0.1% AX... |
CMF65120R00BEBF | Vishay Dale | 0.86 $ | 1000 | RES 120 OHM 1.5W 0.1% AXI... |
CMF65120R00BEEK | Vishay Dale | 0.86 $ | 1000 | RES 120 OHM 1.5W 0.1% AXI... |
CMF65150K00BEEK | Vishay Dale | 0.86 $ | 1000 | RES 150K OHM 1.5W 0.1% AX... |
CMF65150R00BEBF | Vishay Dale | 0.86 $ | 1000 | RES 150 OHM 1.5W 0.1% AXI... |
CMF65150R00BEEK | Vishay Dale | 0.86 $ | 1000 | RES 150 OHM 1.5W 0.1% AXI... |
CMF6515R000BEBF | Vishay Dale | 0.86 $ | 1000 | RES 15 OHM 1.5W 0.1% AXIA... |
CMF6515R000BEEK | Vishay Dale | 0.86 $ | 1000 | RES 15 OHM 1.5W 0.1% AXIA... |
CMF6517K800BEBF | Vishay Dale | 0.86 $ | 1000 | RES 17.8K OHM 1.5W 0.1% A... |
CMF6517K800BEEK | Vishay Dale | 0.86 $ | 1000 | RES 17.8K OHM 1.5W 0.1% A... |
CMF6517R800BEEK | Vishay Dale | 0.86 $ | 1000 | RES 17.8 OHM 1.5W 0.1% AX... |
CMF65196R00BEEK | Vishay Dale | 0.86 $ | 1000 | RES 196 OHM 1.5W 0.1% AXI... |
CMF6519R600BEBF | Vishay Dale | 0.86 $ | 1000 | RES 19.6 OHM 1.5W 0.1% AX... |
CMF6519R600BEEK | Vishay Dale | 0.86 $ | 1000 | RES 19.6 OHM 1.5W 0.1% AX... |
CMF651K0000BEEK | Vishay Dale | 0.86 $ | 1000 | RES 1K OHM 1.5W 0.1% AXIA... |
CMF651K0400BEBF | Vishay Dale | 0.86 $ | 1000 | RES 1.04K OHM 1.5W 0.1% A... |
CMF651K0400BEEK | Vishay Dale | 0.86 $ | 1000 | RES 1.04K OHM 1.5W 0.1% A... |
CMF651K3200BEBF | Vishay Dale | 0.86 $ | 1000 | RES 1.32K OHM 1.5W 0.1% A... |
CMF651K3200BEEK | Vishay Dale | 0.86 $ | 1000 | RES 1.32K OHM 1.5W 0.1% A... |
CMF651K5000BEBF | Vishay Dale | 0.86 $ | 1000 | RES 1.5K OHM 1.5W 0.1% AX... |
CMF651M0000BEEK | Vishay Dale | 0.86 $ | 1000 | RES 1M OHM 1.5W 0.1% AXIA... |
CMF65200K00BEBF | Vishay Dale | 0.86 $ | 1000 | RES 200K OHM 1.5W 0.1% AX... |
CMF65200K00BEEK | Vishay Dale | 0.86 $ | 1000 | RES 200K OHM 1.5W 0.1% AX... |
CMF65200R00BEEK | Vishay Dale | 0.86 $ | 1000 | RES 200 OHM 1.5W 0.1% AXI... |
CMF6520K000BEBF | Vishay Dale | 0.86 $ | 1000 | RES 20K OHM 1.5W 0.1% AXI... |
CMF6520K000BEEK | Vishay Dale | 0.86 $ | 1000 | RES 20K OHM 1.5W 0.1% AXI... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...