CMF709R5300FKEB70

Series:	CMF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	9.53 Ohms
Tolerance:	±1%
Power (Watts):	1.75W
Composition:	Metal Film
Features:	Flame Retardant Coating, Moisture Resistant, Safety
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 175°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.180" Dia x 0.562" L (4.57mm x 14.27mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: CMF709R5300FKEB70 Application Field and Working PrincipleThrough hole resistors are an integral part of circuits and a type of resistors that can be mounted in boards and are usually used in industrial electronics. The CMF709R5300FKEB70 is a type of through hole resistor that is widely used in many applications due to its relative robustness and low costs. In this article, we will discuss the application field of the CMF709R5300FKEB70 as well as its working principle. The CMF709R5300FKEB70 is most commonly used in digital circuits and is usually deployed in sensors, remote control servos, and digital communication protocols. It is also used in power control systems as it can handle higher current levels without overheating and can be used in a variety of environmental conditions. This makes it highly suitable for use in industrial control, automotive, and renewable energy applications. Its small size and high energy efficiency also make it suitable for use in consumer electronics like audio-video receivers and power supplies.The working principle of the CMF709R5300FKEB70 is fairly simple. It is composed of a metal film capacitor and a non-inductive resistor. The capacitor and resistor are in series, and when a voltage source is applied to the circuit, current flows through the circuit in a manner commonly referred to as “Ohm’s Law”. Ohm’s Law states that the voltage (V) in a circuit is equal to the current (I) multiplied by the resistance (R). In the case of the CMF709R5300FKEB70, the resistance is 53 Ohms, the current is 3.6 Amp, and the power is 9 Watts. In addition to the aforementioned application field, the CMF709R5300FKEB70 is often used in commercial aircraft as an alternate source of power. In this application, the resistor is used in conjunction with a DC motor controller to regulate the current, thereby allowing the aircraft to maintain a certain desired speed. The motor controller is necessary to ensure that the voltage and current remain stable throughout the duration of the flight.The CMF709R5300FKEB70 is also used in LEDs and displays. The LED is powered by the resistor and the display is powered by the capacitor. In this application, the resistor acts as a limiting element and provides a consistent current flow that is necessary for proper LED and display operation. The capacitor stores the charge and provides the necessary drive current to the display.Finally, the CMF709R5300FKEB70 is also used in the manufacture of photo-resistors and photo-voltaic cells. The resistor is used to control the current and the capacitor stores the charge. The photo-resistors are typically used to measure exposure to light or radiation in order to activate a switch or trigger an alarm. The photo-voltaic cells are typically used as part of solar panels, where they absorb sunlight and convert it into electrical energy.Overall, the CMF709R5300FKEB70 is a highly versatile and reliable through hole resistor that has applications in many different electronic devices. It is well-suited for industrial applications and is used in commercial aircraft, LED displays, digital circuits, and photo-voltaic cells. This is due to its relative robustness and low cost, its small size and high energy efficiency, and its ability to handle higher current levels without overheating.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description