CMWJFSH.B2-7B-1-1-120-R18-AUO

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LED indication or discrete indication components are widely used in a variety of applications. This type of indication component has existed in many forms, traditionally in the form of lightbulbs and lamps. However, with the introduction of LED technology, LED indication has become a more expansive and widely used method of indication. The CMWJFSH.B2-7B-1-1-120-R18-AUO is a type of LED indication component considered to be part of the discrete indication category.

Overview

The CMWJFSH.B2-7B-1-1-120-R18-AUO is a discrete LED indication component. It is a two-contact, single-orbi LED that emits red light at a wavelength of 615-635nm and features a typical viewing angle of 120 degrees. The device is rated for a maximum current of 20mA, with a voltage range of 2-4V with a power dissipation of 80mW. The component is 18mm in height and 7mm in diameter, being mounted to the printed circuit board with surface mount technology.

Application Fields

Most LED indication components have a broad range of applications, including in warning and safety systems, communications, instrumentation and displays, industry control and automation, automotive systems, and vending machines. The CMWJFSH.B2-7B-1-1-120-R18-AUO is a type of LED indication component specifically designed for use as a discrete indicator in any applications that require an LED indicator. Some potential application fields include external or interior automotive lighting, specifically indicating when a gear selector is being used; security or fire alarm systems, indicating when the system has been activated; serial communication links, indicating when the link is active; and industrial process control, indicating when a process has been initiated.

Working Principle

The CMWJFSH.B2-7B-1-1-120-R18-AUO LED indication component has a typical arrow shaped base with two contact points, enabling the same common electrical connection to allow the LED to light up. When enough current passes through the contacts, the LED emits light in the direction defined by the arrows on its surface. By controlling the LED current and increasing or decreasing it accordingly, the brightness of the LED can be adjusted for various applications.

In most systems, LEDs are connected in series or parallel with a switch used to interrupt the current connection, allowing users to turn the LED on and off. Alternating current (AC) LEDs are also available, which change the shape of the current waveform in order to increase the efficiency of the component. Depending on the specific application, the current can be adjusted to increase the efficiency of the component.

Conclusion

The CMWJFSH.B2-7B-1-1-120-R18-AUO LED indication component is a discrete indication component primarily used in applications that require an LED indication. This component is rated for a current of 20mA, and features an arrow shaped base with two contact points, which enable the same common electrical connection to allow the LED to light up. The LED is also able to be used in both series and parallel configurations for more complex systems, and is suitable for applications in warning and safety systems, communications, instrumentation and displays, industry control and automation, automotive systems, and vending machines. With the introduction of LED technologies, the CMWJFSH.B2-7B-1-1-120-R18-AUO is a key component to consider when creating any discrete LED indicator systems.

The specific data is subject to PDF, and the above content is for reference