CN1020A22A19S6-040

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CN1020A22A19S6-040 is an integrated parametric and mobile RF signal strength monitoring device developed by ZTE Corporation. Its application field mainly involves wireless link field strength testing and monitoring, fault location and diagnosis, interference signal analysis, power control management, etc. In the monitoring system of wireless signal such as GSM900/1800/UMTS, TD-SCDMA/CDMA/WCDMA/LTE, WLAN/WiMAX wireless data transmission systems, the CN1020A22A19S6-040 has a wide range of application.

The basic operating principle of CN1020A22A19S6-040 is to convert the received radio frequency DC signal into a DC digital signal, and carry out digital signal processing while saving data in real time. It can directly provide the test results of field strength on the test instrument, display. At the same time, the collected signal strength value can be uploaded to the software during the test, and the historical field strength records can be reconstructed by viewing the test results in real time. This product integrates the functions of measurement, analysis, fault diagnosis and control, can accurately measure all analog and digital signal strength related parameters, has high measurement accuracy and complete product features.

CN1020A22A19S6-040 uses advanced UHF technology. It adopts a new type of radar antenna, which implements wireless scanning and coverage without having to actually move the device, making it easier to use. The product uses a unique GSM frequency lock algorithm to ensure consistent frequency measurment accuracy, and no matter what the receoved signal is, the measurement value can be stably obtained. It retrieves the measured parameters and field strength value in real time through Bluetooth or USB interface, and can monitor the field strength of the indoor signal. It has displayed modulation type, noise ratio, SNR, signal to noise ratio and other parameters, and has built-in signal frequency scan, indication signal strength signal history trend map, spectrum frequency signal strength mapping, and is accompanied by professional software.

CN1020A22A19S6-040 has two working modes: normal mode and automatic mode. Normal mode is used to manually select the monitoring frequency point and display the field strength of the monitoring frequency point in real time. Automatic mode is used to continuously monitor the field strength of the monitoring points with regular intervals and record the field strength value in real time; when the field strength value exceeds the set threshold value, the device alarms. In addition, CN1020A22A19S6-040 can be used for interference source analysis, GSM 900/1800/UMTS/TD-SCDMA/CDMA/WCDMA/LTE, etc. It is suitable for indoor wireless coverage, field site engineering, leakage and out-of-band investigation acceleration.At present, the application of CN1020A22A19S6-040 has been widely used in China. It not only has the characteristics of high integration, low cost, and high performance, but also has a variety of interfaces and strong interface applicability. It is very suitable for mobile, wireless Base Station, wireless transmission system and other wireless signal performance testing and monitoring applications. In the future, its applications will be more and more extensive. The CN1020A22A19S6-040 provides an effective way for network optimization and fault location in the construction, installation or maintenance of GSM/UMTS/LTE, Wi-Fi and other radio networks.

The specific data is subject to PDF, and the above content is for reference