CN30A110-24

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are essential for a variety of industrial, commercial and residential applications. They provide reliable power conversion between different voltage sources and allow the user to easily control the output voltage and current needed. The CN30A110-24 is a differential voltage input, 48V to 30A adjustable voltage output DC/DC converter. It is designed for high power and high efficiency power conversion applications. This converter\'s features and working principle can be divided into four aspects.

Input Output Characteristics

The input voltage range of the CN30A110-24 is from 48V to 135V. It has a wide differential voltage input range and can accept voltage from any end of the differential voltage, making it ideal for applications where the input voltage can vary from one end of the differential input to the other, such as off-grid solar applications. The output voltage is adjustable from -5V to +75V. The output current is adjustable from 0A to 30A. The power efficiency is 92.5% at full load and 95.1% at 10A.

Protection Features

The CN30A110-24 has several protection features for enhanced reliability. It has short circuit protection, over-voltage protection, and over-temperature protection. It also has input surge protection and transient voltage suppression (TVS) for improved immunity to electrostatic discharge and over-voltage transients. It also has output voltage slew rate control to help prevent overshoot or undershoot during startup and shutdown which helps reduce the risk of destructive electrical arcs.

Other Features

The CN30A110-24 has several other features including remote sensing, current sharing, and remote control. The remote sensing feature allows for precise control of the output voltage by sensing the voltage at the load point. This helps to ensure that the load receives a stable and accurate output voltage even when the input voltage varies. The current sharing feature allows two or more of these converters to be connected in series, allowing for increased current capability with low ripple and noise. The remote control feature allows the converter to be controlled remotely using either an analog, digital, or RS232 interface.

Working Principle

The working principle of the CN30A110-24 is based on the buck converter. It works by converting the input voltage to a lower DC voltage output. The output voltage is regulated by a pulse-width modulated (PWM) signal. The PWM signal acts as an ON/OFF switch for the output power transistors, allowing for accurate regulation over the output voltage. When the output voltage is lower than the desired voltage level, the PWM signal is turned on and the output transistor will switch ON, allowing current to flow from the input to the output. When the output voltage is higher than desired, the PWM signal is turned off and the output transistor will switch OFF, allowing the output voltage to reduce back to the desired value. The PWM signal is adjusted by the microcontroller based on the input voltage and the desired output voltage to ensure that the output voltage is accurate and stable.

The CN30A110-24 is a high power, high efficiency, and adjustable voltage output DC/DC converter designed for a variety of applications. It has wide input voltage range, adjustable output voltage and current, and various protection and control features. It is based on the buck converter working principle and uses a PWM signal to accurately control the output voltage in order to provide a reliable power conversion.

The specific data is subject to PDF, and the above content is for reference