CNB10010SL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optical sensors are devices that measure and analyze light to detect, measure and monitor various properties of substances. One common type of optical sensor is the reflective type analog output sensor. The CNB10010SL is an example of a reflective analog output optical sensor.

The CNB10010SL is an analog output reflective optical sensor designed with an integrated transimpedance amplifier, high speed photo detector and high speed amplifier in one package. It is designed to detect light and measure the intensity of the light and output an analog voltage. It features a 400Hz to 10kHz operating bandwidth, a 6nV/√Hz noise voltage and a maximum 2.4V output voltage span.

The CNB10010SL is typically used in applications such as position sensing, speed sensing, presence/absence sensing, digital color detection and brightness level sensing. It is well-suited for applications where faster response times and higher levels of accuracy are needed. The sensor is suitable for applications in industries such as automobile, consumer electronics and automation sensing.

The working principle of the CNB10010SL can be broken down into several steps. First, the sensor consists of a light-sensitive device, normally a photodetector, which is connected to the system. The photodetector receives the light and converts it into electrical signals. These electrical signals are then sent to an amplifier, which amplifies the signal and outputs an analog voltage based on the intensity of light detected. Finally, this signal is sent to the circuit, where it is used to control the system.

In summary, the CNB10010SL is a reflective analog output optical sensor designed with an integrated transimpedance amplifier, high speed photo detector and high speed amplifier in one package. It is usually used for applications such as position sensing, speed sensing, presence/absence sensing, digital color detection and brightness level sensing. The working principle of the CNB10010SL involves the photodetector receiving the light and converting it into electrical signals, which are then amplified and sent to the circuit to control the system.

The specific data is subject to PDF, and the above content is for reference