Allicdata Part #: | CNY74-4H-ND |
Manufacturer Part#: |
CNY74-4H |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Vishay Semiconductor Opto Division |
Short Description: | OPTOISO 5.3KV 4CH TRANS 16-DIP |
More Detail: | Optoisolator Transistor Output 5300Vrms 4 Channel ... |
DataSheet: | CNY74-4H Datasheet/PDF |
Quantity: | 2663 |
Output Type: | Transistor |
Supplier Device Package: | 16-DIP |
Package / Case: | 16-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -55°C ~ 100°C |
Vce Saturation (Max): | 500mV |
Current - DC Forward (If) (Max): | 60mA |
Voltage - Forward (Vf) (Typ): | 1.3V |
Current - Output / Channel: | -- |
Voltage - Output (Max): | 70V |
Series: | -- |
Input Type: | DC |
Rise / Fall Time (Typ): | 3µs, 4.7µs |
Turn On / Turn Off Time (Typ): | 6µs, 5µs |
Current Transfer Ratio (Max): | 600% @ 5mA |
Current Transfer Ratio (Min): | 50% @ 5mA |
Voltage - Isolation: | 5300Vrms |
Number of Channels: | 4 |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The CNY74-4H optoisolator is a unique type of electronic component with the ability to transfer electrical signals between different circuits while keeping them electrically separated. It is used mainly to prevent damage from high voltages or electromagnetic interference. This optoisolator falls into the category of "transistor-photovoltaic output" optoisolators, along with other models such as the CNY75-4 and the CNY76-4. This article aims to explain the application fields of the CNY74-4H and some of its working principles.
For starters, the CNY74-4H is a 4-pin optoisolator in a dual-in-line package (DIP). This optoisolator works by using a LED (light emitting diode) to control a photovoltaic transistor. This LED is connected to input power and when a voltage is applied to the anode of the LED, it will emit light, which is then absorbed by a phototransistor located within the optoisolator. As the light is absorbed, the output of the phototransistor is activated, outputting an electrical signal. This makes the CNY74-4H an ideal device for electrical isolation and signal transmission applications.
The CNY74-4H is primarily used for signal transmission. Its small size and isolation prevent any interference from other components in the circuit. Its design also ensures that signals are transmitted, with minimal distortion, from the input to the output of the device. This makes it ideal for communications systems and industrial electronic control systems, as well as other applications where low signal loss is necessary.
The CNY74-4H is also used in industrial applications, particularly for process control systems. Its small size and isolation prevent electrical noise from interfering with the process control system. Its wide operating voltage range (4.5 to 30V) also makes it well-suited for these applications. Additionally, its ability to protect against electrostatic discharge (ESD) makes it suitable for use in manufacturing plants or other industrial settings.
The CNY74-4H is also used in sensor applications where its small size and isolation ability can be used to improve accuracy. Its low power consumption also makes it suitable for these applications, as it helps to reduce battery drain. Its ability to prevent ESD can also be important in secure sensor systems.
The CNY74-4H utilizes a photovoltaic output, which gives the device its unique properties. Photovoltaic transistors work by using light to activate the output circuit, which is why this type of optoisolator is often called a "light switch." The LED and phototransistor are activated when light is transmitted from the anode side of the LED to the phototransistor, activating the output circuit. The amount of current outputted by the optoisolator depends on the amount of light transmitted.
In addition, the CNY74-4H has a regular photovoltaic response, where the output voltage is linear with respect to the input current. This ensures that the optoisolator can be used in applications where precise voltage control is desired, as it will produce consistent results. The voltage range of the CNY74-4H also makes it suitable for DC, AC, and pulse applications.
The CNY74-4H is a versatile optoisolator with many applications. Its small size and isolation ability make it ideal for protecting circuits from high voltages or electromagnetic interference. Its photovoltaic output makes it suitable for a range of applications, from signal transmission to secure sensor systems. Additionally, its ability to be used in DC, AC, and pulse applications, as well as its low power consumption and regular response, make it suitable for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
CNY75B | Vishay Semic... | -- | 1579 | OPTOISO 5KV TRANS W/BASE ... |
CNY75GB | Vishay Semic... | -- | 5615 | OPTOISO 5KV TRANS W/BASE ... |
CNY75GC | Vishay Semic... | -- | 4873 | OPTOISO 5KV TRANS W/BASE ... |
CNY75GA | Vishay Semic... | -- | 2789 | OPTOISO 5KV TRANS W/BASE ... |
CNY75A | Vishay Semic... | -- | 1990 | OPTOISO 5KV TRANS W/BASE ... |
CNY74-2H | Vishay Semic... | -- | 5367 | OPTOISOLTR 5.3KV 2CH TRAN... |
CNY74-4H | Vishay Semic... | -- | 2663 | OPTOISO 5.3KV 4CH TRANS 1... |
CNY70 | Vishay Semic... | -- | 3780 | SENSOR OPTO TRANS 5MM REF... |
CNY75C | Vishay Semic... | -- | 1795 | OPTOISO 5KV TRANS W/BASE ... |
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...