Allicdata Part #: | CNZ3731-ND |
Manufacturer Part#: |
CNZ3731 |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Panasonic Electronic Components |
Short Description: | OPTOISOLTR 5KV DARLINGTON 4-DIL |
More Detail: | Optoisolator Darlington Output 5000Vrms 1 Channel ... |
DataSheet: | CNZ3731 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Number of Channels: | 1 |
Voltage - Isolation: | 5000Vrms |
Current Transfer Ratio (Min): | 1000% @ 1mA |
Current Transfer Ratio (Max): | -- |
Turn On / Turn Off Time (Typ): | -- |
Rise / Fall Time (Typ): | 40µs, 15µs |
Input Type: | DC |
Output Type: | Darlington |
Voltage - Output (Max): | 300V |
Current - Output / Channel: | 150mA |
Voltage - Forward (Vf) (Typ): | 1.35V |
Current - DC Forward (If) (Max): | 50mA |
Vce Saturation (Max): | 1V |
Operating Temperature: | -30°C ~ 100°C |
Mounting Type: | Through Hole |
Package / Case: | 4-DIP (0.300", 7.62mm) |
Supplier Device Package: | 4-DIL |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The CNZ3731 optoisolator is a transistor, photovoltaic output device. It is designed to isolate one circuit from another electrically while allowing light to pass between them freely. The optoisolator provides a high level of insulation between two circuits by having them interact inductively and optically, thus eliminating any chance of electrical crosstalk between the two. The CNZ3731 is used in a variety of applications and is available in both surface mount and through-hole packages.
The working principle of the CNZ3731 is based on a photodiode rectifying the light into a DC current. This current is then used to switch on or off a transistor within the optoisolator. When this transistor is in the on state it acts as a current amplifier allowing a small current to be passed through to the output. The light source used is typically an infrared LED mounted inside the optoisolator. The light emitted is directed to the photodiode which then converts it to a current.
The CNZ3731 optoisolator is used in a number of different applications. It is commonly used to control power supplies, motor speed controls, alarm systems, security systems and other similar applications. Due to its high insulation level, it is also often used in applications where it is necessary to protect sensitive electronic components from voltage spikes caused by switching. The optoisolator can even be used to switch high power loads such as motor driven equipment.
The CNZ3731 is available in a range of sizes and packages, including through-hole and surface mount varieties. These packages provide a wide range of features such as reverse polarity protection, insulation voltage, and response time. The response time is important for applications where the time between the optoisolator switching on and off needs to be precise.
The CNZ3731 optoisolator is a reliable and cost-effective mechanism for isolating two circuits from each other. It is easy to install and can be used in a variety of digital and analog applications. The wide range of packages available ensures that this optoisolator is suitable for a wide range of applications. Depending on the application, the response time, insulation voltage, and other parameters can be adjusted and tailored to suit the needs of the user.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
CNZ3731 | Panasonic El... | 0.0 $ | 1000 | OPTOISOLTR 5KV DARLINGTON... |
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...