CP0805B1441AWTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Directional Couplers perform the basic function of coupling a portion of RF energy from a signal source to another point in a circuit where this energy can be used in a useful manner, or coupled to a measuring device in order to measure the power of the RF signal. The CP0805B1441AWTR is a RF Directional Coupler specifically designed to perform in a wide variety of applications, and with a wide range of signal sources.

Design and Specifications

The CP0805B1441AWTR RF Directional Coupler is designed with a frequency range of 300MHz to 4 GHz, and a maximum power handling capacity of 12W. The input/output impedance of the coupler is 50 ohms, providing excellent matching for the signal source. The CP0805B1441AWTR also offers an excellent frequency response, with an insertion loss of 0.3 dB or less over its frequency range.

In addition to its excellent performance, the CP0805B1441AWTR offers a low profile, being just 0.8 mm x 8.0 mm x 4.4 mm, allowing it to be used in tight spaces with minimal disruption to the flow of the signal. The CP0805B1441AWTR is also designed to be resistant to bending and flexing, so it can handle the vibration and rough treatment that can occur during usage.

Applications

The CP0805B1441AWTR has a wide range of applications, including RF communications, automotive, medical, and consumer electronics. The CP0805B1441AWTR can be used to measure RF power, detect spurious signals, and couple signals for use in other applications. It is especially well suited for measuring power on directional antennas, due to its sensitivity and wide frequency range.

Working Principle

The CP0805B1441AWTR works by receiving signal source energy and coupling a portion of it in the opposite direction. The signal being coupled is usually a fraction of the source energy, typically between 1mW and a few milliwatts. The coupling takes place over a certain frequency range, so the energy measured in the opposite direction depends on the frequency of the signal. The CP0805B1441AWTR does this by using a special type of transmission line, called a coupler line.

This coupler line is constructed with two conductive plates, separated by a dielectric material and mounted perpendicular to each other. The plates are usually made of copper or aluminum and are interconnected with several conductors, which form a closed circuit. The plates are also taped together along their edges, forming an air gap. When energy is applied to the coupler line, a portion of it is coupled from one plate to the other, via the air gap.

The amount of energy being coupled is dependent on the length and diameter of the plates, as well as the material used between the plates. This allows for accurate control and measurement of the RF signal energy. The CP0805B1441AWTR is designed with an antenna, allowing it to be used in both transmission and reception applications, making it highly versatile.

Conclusion

The CP0805B1441AWTR is a highly versatile RF Directional Coupler designed for use in a wide variety of applications, from automotive to medical. With its excellent frequency range, power handling capacity, and low profile, it makes a great choice for those looking for a reliable and consistent source for measuring RF power. The CP0805B1441AWTR is also easy to use and can be used to couple signals for use in other applications.

The specific data is subject to PDF, and the above content is for reference