CP0805A1960DWTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A RF directional coupler, generically known as CP0805A1960DWTR, is a type of RF device used to measure the magnitude of signals in an antenna system. It works by relatively isolating a fraction of the input power from the output, allowing the user to examine the properties of the signal coming from the source. In order to use a CP0805A1960DWTR, an impedance matching network must be present to ensure that the desired signal is not generated at the output port. This signal separation process can be used to measure both amplitude and phase of the signal at the input port.

CP0805A1960DWTR is a symmetrical device that uses a minimum of four ports to operate. Input and output ports are used to route signals from one side of the directional coupler to another, whereas the measuring ports, referred to as the coupled port, are connected to a device that can measure the signal strength. The fourth port is the isolation port, which provides the necessary impedance matching in order for the device to operate correctly.

In operation, the Coupled port of the CP0805A1960DWTR receives a fraction of the signal power coming from the input port. The fraction power is known as the coupling coefficient and is usually determined by the designer. It is measured in terms of decibels (dB). The magnitude of the signal at the coupled port is then compared to the magnitude of the signal at the input port in order to measure the signal strength of the incoming signal. This measured signal is then routed to an analyzer or measurement device through the Isolation port.

RF directional couplers are mainly used in antenna systems and wireless communication systems. These devices are employed to accurately measure the power level of incoming signals, while keeping them from interfering with other system components. They are also employed in various measurement systems to measure the signal quality of input signals. In addition, they can also be used as phase shift components in RF and microwave systems. CP0805A1960DWTR directional couplers are especially well-suited for use in 5G networks due to their wide bandwidth and superior return loss performance.

CP0805A1960DWTR directional couplers are also ideal for use in antenna installations, offering low insertion loss (less signal loss at the input) and low return loss (less signal loss at the output). This makes them suitable for installations in which minimum degradation of the signal is required. Furthermore, directional couplers can be used to measure the phase of the RF input signal, allowing application engineers to accurately analyze the signal quality of the RF circuit.

In conclusion, CP0805A1960DWTR directional couplers are an essential RF device for measuring the strength of incoming signals without interference from other components. This allows engineers to accurately measure the power and phase of the signal, making them ideal for use in wireless communication systems and antenna installations. Thanks to their superior performance, they are especially well-suited for 5G systems.

The specific data is subject to PDF, and the above content is for reference