CPCC101K000JB31

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are common and widely used electronic components in the current electrical systems, as they are practical solutions for electronic designers who wish to protect components from electrical overcurrents or surges. CPCC101K000JB31, belonging to the family of Through Hole Resistors, is a type of electro-mechanical component which is mainly used to limit or regulate the flow of current in an electrical circuit. It is typically used in applications where power levels and electrical noise levels need to be safely monitored and regulated in order to ensure that the system does not overload.The CPCC101K000JB31 is an axial-leaded resistor which has a breakdown voltage of 500V per 100V wide power supply. This resistance is made up of non-inductive thick-film ceramic elements. It has the ability to provide a minimum current rating of 1.1A and its maximum current rating is 10A although the current will depend upon the operating environment. The resistor comes in an industry standard package size of 0.4 inches in diameter and 1.2 inches in length. It has a total resistance range of 1K Ohm to 250K Ohm with a tolerance of about 10%.The CPCC101K000JB31 is mainly used in applications where current needs to be limited and highly reliable against inrush current applications and temperature fluctuations. It is also used to replace three-terminal SCRs and other Lower Level Switching Devices (LLSD) because it is capable of carrying higher current ratings. It is commonly used in three-phase motor control, power switching circuits, and automotive engine control systems. The element enables switching control circuits as it is highly reliable in voltage regulation. It can also be used for over current protections, voltage clamping for display, gate drive, and fan speed control.

The CPCC101K000JB31 has a working principle which is based on the control of the current flow by the resistor itself. The resistor acts to either absorb or reduce the amount of current passing through the circuit, thus reducing the possibility of electric shock or circuit overload caused by a surge in the current. This is achieved by the resistor having a higher resistance than the current passing through the circuit, thus essentially limiting the amount of current flow. The resistor is a non-linear device whose resistance increases as the current passes through it, thus limiting the amount of current flow within the system. This is known as the negative resistance characteristic of the resistor.

The CPCC101K000JB31 is a particularly versatile and reliable component, making it an ideal choice for a variety of different applications. It is highly resistant to ambient humidity, temperature, and vibration, and is compliant with RoHS, REACH, and UL 94V-0 requirements, making it suitable for a wide range of industrial and consumer applications. Its reliable performance and versatile design make it an ideal choice for engineers and technicians who require a reliable and efficient resistor to meet their circuit design needs.

The specific data is subject to PDF, and the above content is for reference