CPF133R000JKEE6 Resistors

Series:	CPF
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	33 Ohms
Tolerance:	±5%
Power (Watts):	1W
Composition:	Metal Film
Features:	Flame Proof, Moisture Resistant, Safety
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-65°C ~ 230°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.090" Dia x 0.240" L (2.29mm x 6.10mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors, also known as through-the-board resistors, are widely used in a variety of applications. A typical through hole resistor looks like a cylindrical object, with two pins at one end and two leads at the other. The pins typically connect through the board to the leads, which are used to make the required electrical connection. One example of a through hole resistor is CPF133R000JKEE6. This resistor has two pins which are connected through the board to two terminals. The two pins and terminals are the same width, allowing for increased stability in the insulation. The resistor is made from an insulated material which is resistant to temperature changes and will not be damaged easily. This resistor is also resistant to interference, making it useful in applications where the signal must be uninterrupted. The primary function of this through hole resistor is to protect the components in the circuit from over-voltage, over-current, and other potential problems. When voltage passes through the resistor, it limits the amount of current that can flow through the circuit. This helps to protect the circuit from damage due to excessive current and voltage. In addition, the resistor helps to ensure that the electrical signals sent through the circuit do not contain excess noise or interference. When signals are sent through a resistor, it acts as a filter to ensure that only the desired signals pass through. This helps reduce noise and interference, thus ensuring that the desired signals are transmitted with high signal integrity.The working principle of a through hole resistor is relatively straightforward. The resistor acts as a barrier between the component and the power source. This limits the amount of current that can be sent across the resistor in order to prevent the component from becoming damaged. The resistor is also designed to act as a filter, which means that any interference or noise in the incoming signal will be reduced, allowing for the desired signal to be sent with a high degree of accuracy. Through hole resistors are widely used in a variety of applications. They are typically used to protect components from over-voltage and over-current, while also acting as a filter to reduce interference and noise in the signal. The CPF133R000JKEE6 is a reliable and durable through hole resistor which is ideal for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description