CPI0805E3R3R-10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are passive components used in radio-frequency and electronic circuits. A fixed inductor takes on a specific value of inductance that does not change over its lifetime. These components are typically used in filter circuits and other systems that require a specific, unchanging inductance.The CPI0805E3R3R-10 is a type of fixed inductor designed for high performance radio-frequency applications. The CPI0805E3R3R-10 is a surface mount device in which the inductance is held within a case with two pins. The case prevents air exposure and insulates the component from external noise sources or electrical interference. The inductor is able to handle a maximum current of 3.5A and peak current up to 5A. It is also able to handle a maximum power of 3W.The CPI0805E3R3R-10 is an inductor with a current surge capability and high vibration tolerance. This makes it suitable for high vibration environments such as automotive and industrial applications. Its inductance range is from 3.3nH to 10nH and its operating temperature ranges from -40° C to 105° C.The CPI0805E3R3R-10 is a type of ferrite inductor that uses a ferrite core material to increase inductance. The ferrite core is a non-conductive material with magnetic properties. This core material allows the inductor to store more energy than other types of inductors, resulting in improved efficiency and higher power output.The working principle of the CPI0805E3R3R-10 is based on Faraday’s law of induction. Faraday’s law states that when a conductor moves through a magnetic field, a voltage is induced across the ends of the conductor. In the case of the CPI0805E3R3R-10, the induction voltage is proportional to the rate of change of the magnetic field in the core material.The magnetic field in the core material is created by the presence of an electric current passing through the component. This current creates a magnetic field which induces a voltage across the component. The voltage induced across the component is proportional to the amount of current passing through the component. This voltage is then used to create a voltage spike in the power supply or other circuit components.Because the magnetic field created by the current is proportional to the rate of change of the magnetic field in the core material, the inductance created by the CPI0805E3R3R-10 will vary with changes in the core material or the rate of change of the current. This variation in inductance results in a component that is able to respond quickly to changes in the external circuit environment.The CPI0805E3R3R-10 is designed for use in high-frequency radio-frequency applications. It is suitable for use in high vibration environments such as those found in automotive and industrial applications. Its inductance range from 3.3nH to 10nH and its operating temperature range from -40° C to 105° C make it a versatile component that can be used in a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference