CPPLC5-HT56P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators are electronic components that can generate signals with adjustable frequencies. They are widely used in a variety of applications, such as clock and timing, low jitter generation and synchronization, and frequency synthesis. The CPPLGC5-HT56P programmable oscillator is an advanced device with enhanced features that make it suitable for these applications.

The CPPLGC5-HT56P is a programmable oscillator with excellent frequency accuracy and stability. It uses a multi-layer composite quartz crystal resonator, which has the advantage of a large frequency range and a good temperature coefficient. The frequency accuracy is between 0.5 and 1.5 ppm, and the stability is between ±0.2 and ±2.5 ppm. It is also capable of operating in a wide temperature range from –20°C to 70°C.

The CPPLGC5-HT56P can be programmed using a TTL logic input, which allows for easy frequency selection. The logic level range is 0–1.6V, with a logic low input providing a 0Hz output, while a logic high input will set the frequency value to the programmed frequency. The device also features an adjustable voltage-controlled oscillator (VCO) function, which can be used to adjust the oscillation frequency over a wide range. This can be used to provide frequency stability at different temperature points, or to lower the jitter of the signal.

The CPPLGC5-HT56P is suitable for a variety of applications, including car radios and music players, data acquisition systems, and communication systems. Additionally, it can be used for testing and monitoring of communication systems, and for power management. It is also an ideal choice for clock and timing applications, such as watchmaking, clocks, and computer systems.

The working principle of the CPPLGC5-HT56P is similar to the working principle of many other programmable oscillators. It is based on the interaction between the quartz crystal resonator and the oscillator circuit. The quartz crystal resonator is made up of two electrodes, one connected to the positive power and the other to the ground. Applying a suitable voltage between the electrodes creates a quartz crystal oscillator. The frequency of the output signal depends on the frequency of the quartz crystal resonator and the amplifier circuit.

The CPPLGC5-HT56P device operates by applying a voltage to the electrodes of the quartz crystal resonator. This voltage is generated by the oscillator circuit and is then amplified, resulting in a signal with frequencies dependent on the frequency of the quartz crystal. The output signal can be programmed by setting the logic level of the logic inputs, or by adjusting the voltage-controlled oscillator (VCO) function. The frequency and stability of the signal can also be adjusted by setting the temperature coefficient.

In summary, the CPPLGC5-HT56P is a programmable oscillator with a wide range of features. It is suitable for a variety of applications such as car radios, data acquisition systems, and communication systems. It works by using a multi-layered quartz crystal resonator and oscillator circuit, and can be programmed using TTL logic inputs. It features adjustable VCO functions and temperature coefficients, enabling it to be used for clock and timing applications and frequency stability at different temperatures.

The specific data is subject to PDF, and the above content is for reference