CR15-51-20.0A-R201CV-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An electronic circuit breaker, such as the CR15-51-20.0A-R201CV-T, is a device designed to protect electrical systems and circuits from overloads, short circuits, and other similar hazardous conditions. By quickly sensing dangerous faults and rapidly breaking an electrical circuit, circuit breakers are an important component of any electrical system, providing enhanced safety and preventing costly damage and repairs. This article will discuss the application field and working principle of a CR15-51-20.0A-R201CV-T electronic circuit breaker.

The CR15-51-20.0A-R201CV-T circuit breaker is designed to interrupt current flow in a circuit following a fault or overload condition. It can be used as a part of a variety of electrical systems, such as contactor switches and power distribution systems. As a result, it is common for the CR15-51-20.0A-R201CV-T circuit breaker to be found in a variety of commercial, industrial, and residential areas. Most commonly, electronic circuit breakers are used as a safety device to protect circuits from damage caused by overloads and short circuits.

To ensure safe operation, the CR15-51-20.0A-R201CV-T circuit breaker operates according to the following steps in order to protect the circuit from damage. First, the timing graph is adjusted to meet the requirements of the specific application, allowing the device to be tailored for the task it is responsible for. Then, after a fault in the circuit has been detected by the trip coil being actuated, the timing graph is adjusted for the set time and current rise time. Then, the contactor switch is actuated and the primary contacts open to disconnect the circuit from power. Finally, the spring mechanism resets the circuit breaker, restoring the power to the circuit.

In addition to fulfilling the role of circuit breaker, the CR15-51-20.0A-R201CV-T circuit breaker is also able to act as a current limiter. When a short circuit occurs, the device will respond to the high current by quickly disconnecting the circuit from the power, thus limiting the amount of current allowed to pass through the circuit. This feature is particularly desirable in industrial settings, where a short circuit can cause extensive damage to sensitive electrical components.

Another feature of the CR15-51-20.0A-R201CV-T circuit breaker is its adjustability. By adjusting the timing graph, the maximum amount of current that the device is able to limit or disconnect can be adjusted. This feature allows the device to be tailored to the specific circuit in which it is installed. This results in an increased level of safety as well as increased performance, guaranteeing that the device will respond quickly and accurately to any fault in the circuit.

In conclusion, the CR15-51-20.0A-R201CV-T circuit breaker is a device designed to protect electrical systems and circuits from overloads, short circuits, and other similar hazardous conditions. Its primary task is to quickly sense and respond to dangerous faults, protecting the circuit from damage and providing enhanced safety. In addition, its current limitation and adjustable timing graph feature provide increased performance and a greater level of safety, making it one of the most reliable electronic circuit breakers available.

The specific data is subject to PDF, and the above content is for reference