CR1B25R/CC

Series:	CR1, Neohm
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	25 Ohms
Tolerance:	±0.1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	--
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.091" Dia x 0.248" L (2.30mm x 6.30mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CR1B25R/CC Through Hole Resistors is a type of resistor that is used in electronic devices for passing and controlling the amount of current in a circuit. Generally considered as one of the more reliable of resistors, the CR1B25R/CC Through Hole Resistor offers a high level of versatility to suit the needs of a wide variety of circuits.Design of the CR1B25R/CC Through Hole resistor consists of a cylindrical ceramic body, two metal end terminations, and a coated dielectric coating that is located in between the two metal terminations. The ceramic body and the end terminations provide a uniform resistance to the conductor that is passed through it, while the dielectric coating helps to insulate and protect the electrical components of the device.The CR1B25R/CC Through Hole Resistor is most commonly used in applications where current is limited to a very low level. This configuration is ideal for voltage sensitive applications, as the low resistance allows for a small voltage drop across the resistor, resulting in low current draw. The resistance value of the CR1B25R/CC Through Hole Resistor range from approximately 10 ohms up to 10,000 ohms; however, higher resistance values can be achieved using parallel resistors connected in series. In addition to the low current draw, the CR1B25R/CC Through Hole Resistor is also capable of handling relatively high frequencies; making it ideal for pulsed and frequency-responsive circuits.In terms of operation, the CR1B25R/CC Through Hole Resistor works by providing an electrical resistance that is placed in the signal path of the circuit. When current flows through the resistor, a small amount of energy is dissipated as heat. This dissipated energy is then absorbed and regulated by the resistive component in order to control the amount of current that is being passed through the device.In terms of installation, the CR1B25R/CC Through Hole resistor is placed in the circuit board at the various points where the current is to be regulated. Once the resistor is in place, the electrical connections can then be soldered to the board to ensure that the current flows to the desired destinations. Care should be taken during the installation of the resistor, as any mistakes in the process could possibly result in a short circuit.Overall, the CR1B25R/CC Through Hole Resistor is an excellent choice for regulating the current in an electronic device. It is capable of handling a wide variety of current levels and frequencies, and its dielectric coating helps to protect the component from potential damage. With its reliable performance and its versatility, the CR1B25R/CC Through Hole Resistor is a must-have for any home or office electronics project.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description