CR4110-150

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CR4110-150 Current Transducers

CR4110-150 current transducers are a form of voltage-measuring device used to measure and monitor the electrical current of an electrical circuit. It is also known as a current transformer. These devices measure the rate of ac current flowing through a conductive wire or coil and convert it into a voltage proportional to the current. This type of current transducer is particularly useful for large-scale industrial processes and systems where extremely high currents must be monitored.

These transducers are designed as a single unit for easy installation and operation. It is compatible with all types of current transformers and uses a programmable frequency to enable varying current measurements. This type of transducer is available in two types: the Type 1 and Type 2. Both types offer reliable performance with sufficiently low power consumption, and easy setup and maintenance.

The CR4110-150 current transducer works by measuring the current in the ac circuit and converting it into a voltage. This is done by sensing the rate of variation in the current, and using it to drive the output voltage. This is known as the “hysteretic effect”. The output voltage is proportional to the current. This voltage can then be monitored by an external device, such as a display device or alarm system.

The current transformer within the CR4110-150 current transducer consists of two coils, primary and secondary. The current in the primary coil is measured by the transducer, and the output voltage is produced from the secondary coil. The current flowing in the primary coil is sensed by a Hall-effect sensor and converted into a voltage signal. The output voltage is proportional to the rate of change of current in the primary coil.

The operation of the CR4110-150 current transducer can be controlled by computer software that controls the transducer’s frequency response. The frequency response is adjustable so that the user can adjust the output voltage to suit different applications. The frequency response can be set below or above the typical current requirements of the application.

The CR4110-150 current transducer is designed to be used in applications such as power monitoring, electric motor control, battery charging control, pipe cabling monitoring, electric vehicle charging, and more. It can be used to monitor and regulate power meters, which are used to monitor the load in electrical devices, and measure current levels in power plants, factories, and other locations.

In terms of applications, these current transducers are used in a wide range of industries. Industrial robots, electric vehicles, medical equipment, and electric generators are some of the applications that make use of the CR4110-150 current transducer. Additionally, this current transducer is also used in the manufacturing industry, particularly in production lines where the current transformer is used to monitor and control the speed of the motor, preventing it from running at dangerously high speeds.

Overall, the CR4110-150 current transducer is an excellent device for applications in which precise current measurements are required. It is reliable, efficient, and easy to install and maintain. Moreover, its adjustable frequency response gives the user the flexibility to suit the device to any application.

The specific data is subject to PDF, and the above content is for reference