CR4210-200

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Current transducers such as the CR4210-200 are used to measure and monitor current in electronic systems. The transducer takes a measured current, which can be either alternating (AC) or direct (DC) current, and provides a linear electrical output. The transducer can be grouped into two types; power measurement and monitoring.

The CR4210-200 is an AC current transducer that is suitable for power measurement and monitoring applications. It works by taking a current input, typically from an AC or DC source, and converting it into a voltage output. The voltage output can be measured and monitored with the appropriate instruments.

The CR4210-200 has a wide range of applications including; AC motor and generator protection, load and unload control, ammeter and voltage protection, motor and generator protection, and surge protection. It is also suitable for measuring and logging data related to motor performance, such as temperature and vibration.

The CR4210-200 is easy to install, operate and maintain. It is designed to be installed directly onto the electrical power circuits, and does not require any additional wiring or installation equipment. It also does not require any special setup or maintenance.

The CR4210-200 is also designed for safety, with integrated protections against overloads, short circuits, and surges. A built-in safety relay allows the system to shut off the power circuit in the event of an overload, preventing the transducer itself from being damaged in the process.

The working principle of the CR4210 is based on the magneto-electric field developed when a current flows through a conductor. The current induces a magnetic field in the conductor, which in turn produces an electromotive force (EMF) in the winding of the transducer. This EMF is proportional to the applied current and is converted into a corresponding voltage at the output of the transducer.

The CR4210-200 also offers both high and low power factor correction to enable accurate power measurements. It is capable of measuring currents up to 500 A AC and DC, with an accuracy of 1%.

The CR4210-200 is designed to be resistant to temperature, sweat and soil. It is also designed to be highly reliable, with a long life-time expectancy and a wide temperature operating range of -40 to +80°C. This makes it suitable for use in harsh environments, and is an ideal choice for industrial applications where power measurement and monitoring are required.

In conclusion, the CR4210-200 current transducer is a reliable and efficient instrument for power measurement and monitoring. It is suitable for a wide range of applications such as motor/generator protection, load/unload control, ammeter and voltage protection, and surge protection. The transducer is designed for safety and is easy to install, operate and maintain.

The specific data is subject to PDF, and the above content is for reference