CRA04P0833K00JTD

Number of Pins:	8
Height - Seated (Max):	0.022" (0.55mm)
Size / Dimension:	0.079" L x 0.039" W (2.00mm x 1.00mm)
Supplier Device Package:	--
Package / Case:	0804, Concave, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 155°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	62.5mW
Series:	CRA04
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	4
Tolerance:	±5%
Resistance (Ohms):	3k
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks, arrays, or solid state relays (SSRs) are electronic components designed to regulate and control the flow of electrical signals. They typically consist of an array of resistors, which are connected to a control circuit or chip. The resistor arrays can be used to regulate and control the flow of electrical signals, such as current or voltage, in a wide variety of applications.The CRA04P0833K00JTD is a resistor network used in a variety of applications, such as digital communications, analog signal processing, and power supplies. The CRA04P0833K00JTD utilizes a total of four resistors, each with a different value. This resistor network is comprised of two high impedance resistors, one low impedance resistor, and one fixed value resistor. This resistive network is connected to a control circuit via two lines. One line carries the voltage to the control circuit, while the other carries the ground signal.The CRA04P0833K00JTD has a wide range of applications. It is commonly used in digital communications, analog signal processing, and power supplies. In digital communications, the CRA04P0833K00JTD is used to reduce crosstalk between lines in multiplexer networks that transmit multiple data signals along the same line. In analog signal processing, the CRA04P0833K00JTD is used to manipulate the gain of an analog voltage so it can be used in a proper range for further signal processing. In power supplies, the CRA04P0833K00JTD is used to regulate the current flow and voltage levels of associated circuits.The working principle of the CRA04P0833K00JTD is relatively simple. The two high impedance resistors act as the primary load, while the two lower impedance resistors provide low impedance feedback. This low impedance feedback reduces the total resistance in the network, thus allowing for more effective flow of electrical signals. The fixed value resistor is used to provide a stable source of current for the network. The control circuit can then be used to adjust the voltage and current levels of the resistors in the network, thus providing more control for the intended application.In conclusion, the CRA04P0833K00JTD is a resistor network that is widely used in digital communications, analog signal processing, and power supplies. It is comprised of two high impedance resistors, one low impedance resistor, and one fixed value resistor. The CRA04P0833K00JTD utilizes a combination of these resistors to regulate and control the flow of electrical signals in a variety of applications. The working principle of the CRA04P0833K00JTD is relatively simple to understand; however, the application of this resistor network varies greatly depending upon the application. As such, proper design considerations and an understanding of the application characteristics are necessary prior to selecting the most appropriate resistor network for use.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description