CRA06S08351K0JTA

Number of Pins:	8
Height - Seated (Max):	0.024" (0.60mm)
Size / Dimension:	0.126" L x 0.059" W (3.20mm x 1.50mm)
Supplier Device Package:	--
Package / Case:	1206 (3216 Metric), Convex, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	--
Operating Temperature:	-55°C ~ 155°C
Temperature Coefficient:	±200ppm/°C
Power Per Element:	62.5mW
Series:	CRA06
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	4
Tolerance:	±5%
Resistance (Ohms):	51k
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

CRA06S08351K0JTA is a resistor network which is usually used for signal conditioning in power electronic converter systems. It consists of three resistors connected in an RC network and is constructed with high-critical resistors which provide tight tolerance and low-temperature coefficient. It is mainly used for signal conditioning in power electronic converter systems, such as automotive and motor control, telecom power supplies, and lighting applications.

Application Field

The application field of CRA06S08351K0JTA is mainly in power electronic converter systems where tight tolerances and low temperature coefficient are required. In automotive and motor control applications, for example, this device is often used for current-mode control. The current sensing function of the device can detect the current variation in the motor and adjust the current accordingly. In telecom power supplies, this device is used to sense the voltage of the DC output and adjust it to a correct value. Similarly, in lighting applications, it is used to sense the voltage and control the output lighting level.

Working Principle

CRA06S08351K0JTA is constructed with high-critical resistors, as discussed above. The three resistors are connected in a resistive-capacitive (RC) network. This RC network forms a low-pass filter and has a cut-off frequency that is determined by the amount of capacitance and the total resistance of the network. This cut-off frequency is adjustable through the resistor values in the circuit.The resistors in the circuit form a voltage divider circuit which divides the input voltage and feeds a portion of it to the output. The proportion of the output voltage to the input voltage can be changed by adjusting the resistor values in the circuit. Thus, this allows the device to be used for signal conditioning applications, such as in the automotive and motor control, telecom power supplies, and lighting applications discussed above.

Conclusion

CRA06S08351K0JTA is a resistor network that is used for signal conditioning in some power electronic converter systems. Its application field includes automotive and motor control, telecom power supplies, and lighting. The device consists of three resistors connected in an RC network and is constructed with high-critical resistors which provide tight tolerance and low-temperature coefficient. The working principle of CRA06S08351K0JTA is based on the voltage divider circuit formed by the resistors and the low-pass filter created by the RC network. This allows the device to be used for signal conditioning applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description