Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

CRA04S04318R0JTD is a resistance network array with a combined value of 318 ohms. This combining and dividing of signals is an essential process in many electrical and electronic circuits. As such, resistor network arrays are used extensively in a wide variety of applications including the telecommunications, power, and control fields. This article will explain the various application fields and the operating principles of the CRA04S04318R0JTD.

Application Fields

Resistor network arrays, such as the CRA04S04318R0JTD, are used mainly in audio applications to produce specific attenuation, frequency shaping, and signal mixing/splitting circuits. In particular, the CRA04S04318R0JTD is well suited for the medium-level audio applications due to its high impedance, low distortion, and low thermal noise. It can be used for audio control such as volume control, loudness control, treble/bass control, and other audio tone controls. The CRA04S04318R0JTD can also be used to distribute audio signals in multiroom applications such as in conference rooms and commercial sound systems.

The CRA04S04318R0JTD is also used in video applications. For example, it can be used for video signal mixing, dividing, and attenuation in the video transmission systems. In addition, its low thermal noise and low distortion make it ideal for video signal monitoring, low level video DAC, genlock input, and video signal processing.

The CRA04S04318R0JTD can also be used in computer related applications. In many computers, resistive networks are used for address/data bus decoding, voltage detection, backplane transmission, and memory buffer control. It can also be used to monitor the power supply in high performance computers.

Working Principle

The CRA04S04318R0JTD consists of four resistors which are connected in series-parallel arrangement. This provides two different resistances of 180 ohms and 138 ohms. The combined value of 318ohms is the total resistance of the network array. This arrangement provides an effective way to attenuate a signal, as the signal passing through the network is attenuated by the resistors.

In a typical application, a signal input is connected to the input of the CRA04S04318R0JTD and the output is then connected to the load. As the signal passes through the resistor network, it is attenuated by the resistance of the network. Depending on the type of application, the signal can be attenuated by different amounts, depending on the load.

For example, in the case of a single resistor, a 100 ohm resistor connected to a load of 200 ohms can attenuate the input signal by half. Similarly, for the CRA04S04318R0JTD, the output signal is attenuated depending on the load connected to it. If the load is 200 ohms, then the output signal is attenuated by a factor of two, as (200 ohms/318ohms) = 0.63, which means that the output signal has 63% of its original value.

The CRA04S04318R0JTD is an important component in signal processing, as it provides the necessary attenuation to prevent signal overload and distortion. It is also an efficient way to separate a signal into its component signals, as the different resistive values divide the signal accordingly.

Conclusion

In conclusion, the CRA04S04318R0JTD resistance network array is an important component in signal processing, providing an effective way to attenuate and divide signals, and is widely used in audio, video, and computer applications. By understanding the working principle of the CRA04S04318R0JTD, one can better utilize the network in any application requiring signal attenuation and division.

The specific data is subject to PDF, and the above content is for reference