CRA06E08310K0JTA

Resistor networks and arrays are common electronic components used in many industries. The CRA06E08310K0JTA is such an example. The device can be used to create a voltage divider or current sensing voltage divider circuit, or for purposes such as limiting current in a circuit or providing a switchable resistance for various applications.

General Application Field of CRA06E08310K0JTA

The CRA06E08310K0JTA is an array of resistors housed in a single integrated package. It is primarily used in a variety of applications including but not limited to voltage regulation, over-voltage protection, current sensing, and switching applications.

The CRA06E08310K0JTA is a network of resistor elements, consisting of four individual resistors, grouped together in one package. The resistors are arranged in pairs with the four resistors being in series-parallel combination. This arrangement provides a 0.25 ohm resistance with a tolerance of 0.2 ohms.

Working Principle of CRA06E08310K0JTA

The CRA06E08310K0JTA is designed to produce an adjustable voltage divider or current-sensing voltage divider. The circuit is typically constructed with the resistors arranged as a voltage divider, with one end of the resistor being the signal input and the other end being the output. The ratio of this voltage divider is determined by the ratio of the two resistors.

In its simplest form, the CRA06E08310K0JTA can be used to create a voltage divider circuit. In this type of circuit, the voltage across the resistor is proportional to the current flowing through it. When a voltage is applied to the resistor, a current will flow. The amount of current depends on the resistance value of the resistor and the input voltage.

By adjusting the value of the resistor, the output voltage of the circuit can be adjusted. This is done by increasing or reducing the amount of current that flows through the resistor. Changing the current changes the voltage across the resistor and this effectively varies the output voltage. This can be used for voltage regulation or to limit the current in a circuit.

The CRA06E08310K0JTA can also be used to create a current-sensing voltage divider circuit. In this type of circuit, the voltage is proportional to the current flowing through it. The current flowing through the resistor is dependent on the voltage applied to it. By adjusting the input voltage, the amount of current that flows through the resistor can be controlled.

The CRA06E08310K0JTA can also be used in switching applications. In this type of application, the resistor is used as a switchable resistor and the output voltage is switched between two fixed values. This is done by adjusting the input voltage, which in turn changes the resistance value of the resistor.

The CRA06E08310K0JTA is a flexible array of resistors in a single device, designed for many different applications. It can be used to create a voltage divider or current sensing voltage divider circuit, as well as to limit current in a circuit or provide a switchable resistance for applications.