![CRC4A8E470JT Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
Allicdata Part #: | CRC4A8E470JT-ND |
Manufacturer Part#: |
CRC4A8E470JT |
Price: | $ 0.00 |
Product Category: | Resistors |
Manufacturer: | Kyocera International Inc. Electronic Components |
Short Description: | RES ARRAY 8 RES 47 OHM 1506 |
More Detail: | 47 Ohm ±5% 62.5mW Power Per Element Isolated 8 Res... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | 0.00000 |
Number of Pins: | 16 |
Height - Seated (Max): | 0.022" (0.55mm) |
Size / Dimension: | 0.150" L x 0.063" W (3.80mm x 1.60mm) |
Supplier Device Package: | 1506 |
Package / Case: | 1506, Convex, Long Side Terminals |
Mounting Type: | Surface Mount |
Applications: | -- |
Operating Temperature: | -55°C ~ 125°C |
Temperature Coefficient: | ±250ppm/°C |
Power Per Element: | 62.5mW |
Series: | CRC, Kyocera |
Resistor-Ratio-Drift: | -- |
Resistor Matching Ratio: | -- |
Number of Resistors: | 8 |
Tolerance: | ±5% |
Resistance (Ohms): | 47 |
Circuit Type: | Isolated |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Resistor Networks, Arrays
In the world of electronic devices, a resistor network or array is a type of passive component that is composed of either parallel or serial resistors. The two-terminal component, known as the single-pole-one-throw (SPOT) switch, is the most commonly used type of resistor network. This type consists of two series-connected resistors that are connected to one point each and can be either in an open or closed position. In addition, there is a ground terminal that is connected to the opposite terminal.
The CRC4A8E470JT resistor network is a type of SPOT switch. The main feature of this type is its high precision and the ability to control current with low losses. It is designed to reduce the energy dissipation or power loss at the same time providing reliable and accurate operation. The CRC4A8E470JT resistor network also has a relatively high frequency response, making it suitable for use in data rate applications such as high-speed serial data transfer.
The working principle of the CRC4A8E470JT resistor network is based on the transfer of energy between two resistors. When power is applied to the two series connected resistors, an electrical current will flow through both resistors. The resistance of the resistors will determine the amount of current that will be transferred between them. When the current is greater than the resistance of the resistors, the network will operate as an amplifier, increasing the signal strength.
When the solution resistance is equal to or higher than the target resistance of the resistor network, the network will operate as a low-pass filter. This means the signal will be passed through at a lower level than the input level. The resistor network can also operate as a high-pass filter if the solution resistance is lower than the target resistance of the resistor network.
The CRC4A8E470JT resistor network is used in a variety of applications such as in power supplies, high-voltage circuit protection, low-frequency signal processing, and high-precision data rate applications. This type of resistor network is also used in industrial automation, telecommunications, medical imaging, automotive controllers, and other similar electric and electronic applications. In addition to its use in these applications, the CRC4A8E470JT resistor network is also used for designing efficient power supplies, converting AC/DC in adjustable current sources, and for providing equalizing, balancing, and decoupling of circuits.
The CRC4A8E470JT resistor network is designed to provide excellent control, precision, and reliability. It is available in a range of sizes and configurations to meet the varying needs of different applications. This type of resistor network is also designed to be energy-efficient, allowing it to be used in applications where power is a primary concern. Overall, the CRC4A8E470JT resistor network is an ideal choice for a wide range of electrical and electronic applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
CRC4A8E470JT | Kyocera Inte... | 0.0 $ | 1000 | RES ARRAY 8 RES 47 OHM 15... |
RES NTWRK 18 RES 47 OHM 36LBGA47 Ohm 1% ...
![RT2465B7TR13 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RES NTWRK 32 RES 56 OHM 36LBGA56 Ohm 1% ...
![RT2427B6TR13 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RES ARRAY 4 RES 39 OHM 120639 Ohm 5% 62....
![CRC3A4E390JT Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RES ARRAY 4 RES 43 OHM 080443 Ohm 5% 62....
![CRB2A4E430JT Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RES ARRAY 4 RES 120 OHM 0804120 Ohm 5% 6...
![CRB2A4E121JT Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RES ARRAY 2 RES 300 OHM 0606300 Ohm 5% 6...
![CRB1A2E301JT Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)