CRT16-10WH-100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Single Conductor Cables (Hook-Up Wire) are an essential part of many electrical systems: they\'re used to connect components, to provide power, or to perform other functions. CRT16-10WH-100 is one such cable, intended for specific applications and with particular working principles.

This cable is a high quality wire with a diameter of 16AWG (American Wire Gauge) and an insulation resistance of 10 ohms per one hundred feet. It is designed to meet the requirements of the UL Code 44 for both resistivity and dielectric strength, and complies with the RoHS Directive for its construction materials, as well as the restrictions for maximum toxic elements.

The insulation of CRT16-10WH-100 is made of heat and cold-resistant polyethylene and polyurethane. Its bare conductor is made of stranded silver-plated copper, coated with a proprietary conductive coating for increased corrosion resistance. This specialized coating allows for maximum performance when exposed to high-voltage fields and puts the cable at the forefront of high-end wiring solutions in terms of both safety and electrical performance.

Since this cable is rated up to 600 volts, it is suitable for a variety of applications ranging from computers and telecommunications to automotive and industrial equipment. It is well equipped to handle temperature ranges from -55°C to 125°C (-67°F to 257°F) within its operable voltage range. This cable can also be used in damp locations with its water blocking and enhanced dielectric properties.

CRT16-10WH-100 employs a high-density construction of polyethylene coupled with a shield-free nylon layer which is optimized to protect against induced interference and crosstalk. The polyurethane insulation also provides puncture resistance which is necessary when running cables around corners, over door jambs, or traversing tight areas.

From a wiring standpoint, CRT16-10WH-100 is also very versatile. It can be used as an interconnect means with no need for a screw terminal. If it is desired to terminate the cable, crimp and set screws are available, in addition to the soldered and crimped ends. The cable is UL certified and can also be used in UL 277 approved applications.

The working principle of CRT16-10WH-100 is based on passing an electrical signal or power through a wire at a regulated voltage level. This wire is insulated to maintain the integrity of the signal and minimize any interference with any other power sources. As the signal is transmitted, the resistance in the wire induces a voltage drop along its length, reducing the overall safety and performance of the cable. To counter this, CRT16-10WH-100 has a high insulation resistance and is engineered to provide a low voltage drop.

A low voltage drop is essential for any application involving delicate electronics and circuitry, as it ensures the cable can carry a large amount of power without compromising the signal. This resistance, coupled with its UL certification, makes it an ideal cable for many applications, from computer networks to automotive and industrial equipment.

In summary, CRT16-10WH-100 is a single conductor cable specifically designed for the most demanding applications. Its superior insulation resistance and low voltage drop provide safety, reliability, and performance to any system it is used in. Its versatile design makes it suitable for a wide array of applications, and its UL certification ensures it meets the highest standards of safety.

The specific data is subject to PDF, and the above content is for reference