Allicdata Part #: | CSNX1000M-101-ND |
Manufacturer Part#: |
CSNX1000M-101 |
Price: | $ 0.00 |
Product Category: | Sensors, Transducers |
Manufacturer: | Honeywell Sensing and Productivity Solutions |
Short Description: | CURRENT SENSOR |
More Detail: | Current Sensor 8A, 12A, 25A (Selectable) 3 Channel... |
DataSheet: | CSNX1000M-101 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Linearity: | ±0.1% |
Package / Case: | 8-DIP Module |
Mounting Type: | Through Hole |
Polarization: | Bidirectional |
Operating Temperature: | -40°C ~ 85°C |
Current - Supply (Max): | 12mA |
Response Time: | 0.2µs |
Voltage - Supply: | 4.75 V ~ 5.25 V |
Accuracy: | ±0.24% |
Series: | CSN |
Frequency: | DC ~ 200kHz |
Sensitivity: | -- |
Output: | Ratiometric, Current |
Number of Channels: | 3 |
Current - Sensing: | 8A, 12A, 25A (Selectable) |
Sensor Type: | Magnetoresistive, Open Loop |
For Measuring: | AC/DC |
Part Status: | Obsolete |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Current Transducers
The CSNX1000M-101 is a current transducer with an accuracy rating of 0.1% or better. It can be used to measure current in AC/DC systems, and is particularly suitable for measuring peak currents. The transducer has a wide dynamic range and can measure up to 1000A peak current. It is also highly power efficient, requiring only 5V to operate.
Application Field
The CSNX1000M-101 transducer is suitable for a variety of applications, including power systems, electrical motor control, and renewable energy applications. It can be used for energy monitoring and management, as well as motor control. It can also be used for measuring the current of photovoltaic systems, such as solar panels. Additionally, the transducer is suitable for mechanical vibration monitoring systems, as it can accurately measure peak currents in AC/DC systems.
Working Principle
The working principle of the CSNX1000M-101 transducer is based on the hall effect. The transducer has two probes, which are used to measure the magnetic field created by a current flowing through a conductor. The magnetic field is detected by the probes, and the transducer converts this to an electrical signal. This signal is then amplified and processed by the transducer, and the output is a proportional representation of the current being measured.
The transducer is also equipped with a voltage regulator, which helps to ensure that the output signal is not affected by supply voltage variations. Additionally, the transducer has short circuit and overload protection. This helps to ensure that the transducer does not suffer any damage when subjected to large currents or short circuits.
Conclusion
The CSNX1000M-101 transducer is a versatile and accurate current measurement device, which is suitable for a variety of applications. It has a high accuracy rating of 0.1% or better, and can accurately measure peak currents in AC/DC systems. The transducer is also highly power efficient, and is protected against overloads and short circuits.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
CSNX25 | Honeywell Se... | 26.38 $ | 1000 | SENSOR CURRENT MR 56A AC/... |
CSNX1000M-101 | Honeywell Se... | 0.0 $ | 1000 | CURRENT SENSORCurrent Sen... |
CSNX1000M-201 | Honeywell Se... | 0.0 $ | 1000 | CURRENT SENSORCurrent Sen... |
CSNX1000M-211 | Honeywell Se... | 0.0 $ | 1000 | CURRENT SENSORCurrent Sen... |
SENSOR CURRENT XFMR 40A ACCurrent Sensor...
SENSOR CURRENT XFMR 5A ACCurrent Sensor ...
SENSOR CURRENT HALL 15A AC/DCCurrent Sen...
3 PIECE KIT SENSOR CURRENT HALLCurrent S...
PACT RCP-4000A-1A-D190Current Sensor 100...
SENSOR CURRENT HALL 30A DCCurrent Sensor...