CSTNE12M0G52A000R0

Resonators are used to filter out or select specific frequencies and waves in a wide range of electrical and mechanical applications, therefore enabling the devices or systems using them to respond only to the specific waveforms or frequencies and not to interfere with other signals. As a result, resonators are a key component to tune out particular frequency noise from a range of waveforms.

The CSTNE12M0G52A000R0 resonator is a 12 MHz ceramic resonator and is surface mounted onto a circuit board. This resonator is composed of layers of metalized ceramic and the metal elements are regulated using specially developed technologies for efficient frequency response. The metal elements are tiny inductance and capacitance components with their surface contact acting as the resonance point. This allows the resonance point to be adjusted, as well as the frequency response.

CSTNE12M0G52A000R0 resonators are used in a wide range of multilayer circuit boards. In these boards, they are used as frequency filters to remove unwanted frequencies, enabling the circuit to respond only to the desired frequency or waveform. The resonator works by adjusting the total inductance and capacitance of the surface. This is done by shortening the distance between the metal elements and increasing their surface area. This increases the inductance and capacitance of the resonance point and consequently changes the frequency response.

In addition to circuit boards, CSTNE12M0G52A000R0 resonators are also used in oscillators and band-pass filters. An oscillator is an electronic circuit that produces alternating current. Oscillators are used in a variety of electronic applications, from clocks and watches to modulators and mixers. The frequency of the generated AC wave is determined by the resonator and determines the frequency response of the circuit. Band-pass filters are used to filter out all signals below or above a certain frequency, so that only those signals within the specified range are passed. The resonator is used to adjust the frequency range and determine the cutoff frequency.

The CSTNE12M0G52A000R0 resonator is a highly efficient and robust resonator that operates at 12 MHz. The metalized ceramic construction allows it to have a high level of tunability, and its surface-mounted construction minimizes size and weight. This type of resonator is widely used in a variety of applications where it is necessary to select or filter out certain frequencies or signals, such as multilayer circuit boards, oscillators, and band-pass filters.