CTSR 0.3-P Sensors, Transducers

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Current transducers (CTSR) are electrical instruments used to measure the magnitude of an alternating current. They are used in many applications, from power plants to industrial equipment. The CTSR 0.3-P is a highly accurate, single-phase current transducer that is designed to accurately measure a current waveform up to a frequency of 400 Hz. It is typically used in applications such as AC power meters, motor control systems, and energy monitoring systems.The CTSR 0.3-P measures the magnitude of a single-phase sinusoidal current waveform by using a peaking circuit to convert the current into a sinusoidal voltage. The sinusoidal voltage is then filtered and amplified, and the amplitude is measured. This amplitude is then used to calculate the magnitude of the current under measurement.The CTSR 0.3-P is designed to be highly accurate, with an accuracy of ± 0.5% and a frequency range of 0.1 to 400 Hz. The main components of the transducer include a transformer, low-pass filter, an amplifier, and a rectifier. The transformer is used to isolate the signal from the DC bus voltage, and the low-pass filter removes any high-frequency noise that might be present in the signal. The amplifier amplifies the signal, and the rectifier converts the amplified sinusoidal voltage into a DC voltage. The CTSR 0.3-P also uses a voltage divider to adjust the sensitivity of the current measurement. The voltage divider is an adjustable resistor, which is used to set the desired sensitivity of the transducer. The voltage divider also helps the transducer to respond to a larger range of input current frequencies.The CTSR 0.3-P is typically used in applications where a high degree of accuracy is required. The accuracy and wide frequency range of the transducer make it suitable for measuring current in applications such as power meters, motor control systems, and energy monitoring systems. The transducer is also suitable for measuring current in digital systems, such as computers and embedded systems. In addition to its accuracy, the CTSR 0.3-P uses a power-saving design, allowing it to be used in battery-powered systems. The transducer also has a robust construction, making it suitable for use in harsh environments. The CTSR 0.3-P is a reliable and accurate current transducer that is suitable for use in a variety of applications. Its accuracy and wide frequency range make it suitable for measuring current in digital and analog systems. Additionally, its power-saving design allows it to be used in battery-powered systems. The transducer is also well-suited for use in harsh environments.

The specific data is subject to PDF, and the above content is for reference