Allicdata Part #: | CUR3105UT-A-ND |
Manufacturer Part#: |
CUR3105UT-A |
Price: | $ 1.02 |
Product Category: | Sensors, Transducers |
Manufacturer: | TDK-Micronas GmbH |
Short Description: | TO92-UT |
More Detail: | TO92-UT |
DataSheet: | CUR3105UT-A Datasheet/PDF |
Quantity: | 1000 |
2000 +: | $ 0.92537 |
Linearity: | ±0.5% |
Package / Case: | TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) |
Mounting Type: | Through Hole |
Polarization: | -- |
Operating Temperature: | -40°C ~ 170°C (TJ) |
Current - Supply (Max): | 10mA |
Response Time: | 3ms |
Voltage - Supply: | 4.5 V ~ 5.5 V |
Accuracy: | -- |
Series: | -- |
Frequency: | 1kHz |
Sensitivity: | -- |
Output: | Ratiometric, Voltage |
Current - Sensing: | Programmable |
Sensor Type: | Hall Effect, Open Loop |
For Measuring: | AC/DC |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Current transducers are devices that measure current in an electric circuit. The CUR3105UT-A is a type of current transducer that can measure alternating current and direct current. This transducer is mainly used for motor control and protection applications. One of the main features of the CUR3105UT-A is its built-in self-test capability. This makes it easier to diagnose faults in the system.
The CUR3105UT-A has two electrode structures: a vertical bridge and a horizontal bridge. The vertical bridge has two positive and two negative terminals which are connected to a measuring sensor. The horizontal bridge has two positive terminals which are connected to a reference potential. When the measuring sensor is connected to one side of the circuit and the reference potential is connected to the other side, current is measured through the bridge.
The CUR3105UT-A also has an impedance matching circuit. This circuit is used to match the impedance of the measuring sensor to that of the reference potential. This ensures that the measuring sensor receives the same signal as the reference potential. The impedance matching circuit also helps to reduce noise and other interferences that can affect the accuracy of the measurement.
The CUR3105UT-A also features a Hall Effect sensor. This sensor is used to measure the magnetic field generated by the current in the circuit. This signal is then converted into voltage, which is used to measure the current. The Hall Effect sensor has a high resolution and accuracy, making it suitable for precise current measurements.
The CUR3105UT-A has a built-in Digital Signal Processor (DSP) which processes the signal and converts it to digital data. The DSP can also be used to adjust the parameters of the current transducer, such as the gain, offset, and noise threshold. This makes the CUR3105UT-A well suited for applications where precise current measurements are needed.
The CUR3105UT-A is designed to be used in a wide range of motor control and protection systems. Its built-in self-test and impedance matching circuits make it easy to install and use. The Hall Effect sensor provides accurate and reliable current measurement, which makes the CUR3105UT-A ideal for high precision applications. Furthermore, the built-in DSP can be used to adjust the parameters of the transducer, making it well suited for various applications. The CUR3105UT-A is therefore an excellent choice for motor control and protection applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
CUR3105UT-A | TDK-Micronas... | 1.02 $ | 1000 | TO92-UTTO92-UT |
CUR3115DZ-A | TDK-Micronas... | 1.06 $ | 1000 | SOIC8SOIC8 |
SENSOR CURRENT XFMR 40A ACCurrent Sensor...
SENSOR CURRENT XFMR 5A ACCurrent Sensor ...
SENSOR CURRENT HALL 15A AC/DCCurrent Sen...
3 PIECE KIT SENSOR CURRENT HALLCurrent S...
PACT RCP-4000A-1A-D190Current Sensor 100...
SENSOR CURRENT HALL 30A DCCurrent Sensor...