CV90-U0655-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Evaluation and Development Kits, Boards can provide a platform for engineers to quickly design, debug, evaluate and test prototypes and new applications using a wide range of RF chips and component technologies. The CV90-U0655-1 is one such board that can be used for a wide range of applications and its working principle is explained in further detail in this article.

The CV90-U0655-1 is a board with an integrated software-defined radio (SDR) digital baseband system that enables it to be used for complex, multi-rate, multi-protocol applications like Wi-Fi, LTE, GPS, and others. It comes pre-installed with FPGA and antenna components. The board is also programmed with a powerful processor that allows for clock rate processing, modulation/demodulation, and single transceiver operations. This means that engineers can quickly design and prototype systems with the platform and quickly move on to testing and evaluation.

The board has a 52-pin surface-mount connector with various pins for power, ground, reference clocks, and monitoring of RF signal quality. It also features a software-controlled, low-level phase locked loop (PLL) that provides clock rate control from the board\'s processor. It also has an integrated digital receiver that supports up to four streams. This allows engineers to evaluate the performance of different receiver algorithms in a wide variety of RF conditions.

When it comes to the application field of the CV90-U0655-1, it can be used to develop and test products in the following categories:

• Cellular phones with LTE support
• Wireless networks for WiFi, WiMax, and Zigbee
• Surveillance and security systems
• GNSS receivers
• Smart appliances
• Industrial IoT devices
• Smart wearables

The use of the board can also extend to automotive applications, including in-vehicle infotainment systems, self-driving cars, and advanced driver assistance systems (ADAS). In addition, it can be used in consumer electronics, including smart TVs, home automation, and home entertainment products.

The working principle of the CV90-U0655-1 is quite simple. The board is connected to an RF source, which provides an input signal. The signal is then processed digitally by the integrated digital baseband system within the board. The processor on the board converts the input signal into a digital representation, which is then monitored and manipulated by the various elements on the board. This includes the low-level PLL, as well as the digital receiver. The output signal is then sent out through the board\'s antenna element and can be used for various applications.

In conclusion, the CV90-U0655-1 is an RF Evaluation and Development Kit, Board with a wide range of applications in different industries and a straightforward working principle. This platform provides engineers with a powerful platform to quickly design, evaluate, and test their RF components and designs. With support for both digital and analogue signals, this board can be used in a wide variety of applications, including cellular phones, surveillance systems, GNSS systems, and automotive applications.

The specific data is subject to PDF, and the above content is for reference