CVCO33CL-0770-0870

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

VCOs (Voltage Controlled Oscillators)

A voltage-controlled oscillator (VCO) is a type of electronic oscillator circuit that controls the frequency of oscillation with the help of an external voltage source. The output frequency of VCO is a function of the input voltage, allowing frequency to be precisely controlled by changing the voltage, for example through the use of a voltage-tunable filter or a voltage-to-frequency converter. VCOs are commonly used in radio frequency and wireless communication systems, digital synthesizers, and PLL (phase-locked loop) circuit designs.The CVCO33CL-0770-0870 is a Voltage Controlled Oscillator (VCO) with a frequency range of 770 MHz to 870 MHz in 1.8 V supply voltage. It is a fully integrated, dual-use MECL-compatible VCO with excellent phase noise and low current consumption.The CVCO33CL-0770-0870 is an ideal solution for use in microwave applications such as point-to-point radio, W-CDMA, LTE, WiMAX, TD-SCDMA, Wi-Fi and GPS systems. It is also suitable for use in wideband radar systems and other high-speed and low-phase noise applications.The CVCO33CL-0770-0870 features excellent phase noise with a figure of merit of -119 dBc/Hz at offset 1 kHz from its nominal center frequency range of 770 MHz to 870 MHz. The operating current is designed to be low and stable, with typical values of 3.5 mA at a supply voltage of 1.8 V. The tuning voltage range is from 0 V to 5 V and the device has a wide band of -50 dBc to -60 dBc of typical output power.The working of CVCO33CL-0770-0870 depends on the capability of the voltage applied at the control input of a VCO to affect its resonating frequency. This can be varying based on the design of the oscillator circuitry but typically, on applying a higher control voltage, the oscillator frequency shifts to a higher value and on applying a lower control voltage, the oscillator frequency shifts to a lower value. In theCVCO33CL-0770-0870, tuning is achieved by varying the voltage applied to the control input of the VCO. In this VCO, the frequency can be varied from 770 MHz to 870 MHz in accordance with the VCcontrol voltage (which can range from 0 V to 5 V). It is important to note that the existence of external electrical interference may also cause frequency changes in the oscillator output, and thus it is important to design VCO circuits with impedance level control. In addition to the control voltage, the CVCO33CL-0770-0870 also requires a bias voltage and a reference voltage to work optimally. The bias voltage is usually supplied externally, while the reference voltage helps to adjust the center frequency of the oscillator. The reference voltage can be adjusted using an external resistor or potentiometer circuit. The CVCO33CL-0770-0870 is an ideal choice for applications where frequency control and stability are of utmost importance, including wireless communication systems, radar systems, and frequency synthesis. Its wide operating frequency range, low operating current, excellent phase noise and low cost make it an ideal solution for a variety of applications.

The specific data is subject to PDF, and the above content is for reference